Dell W-Series 334 Instant 6.5.1.0-4.3.1.0 User Guide - Page 40

Table 10: Contents of the Info Section in the Instant Main Window Name Description l Clients-Number of clients associated with the W-IAP. l Type-Displays the model number of the W-IAP. l Zone-Displays W-IAP zone details. l CPU Utilization-Displays the CPU utilization in percentage. l Memory Free-Displays the memory availability of the W-IAP in MB. l Serial number-Displays the serial number of the W-IAP. l MAC-Displays the MAC address. l From Port-Displays the port from where the slave W-IAP is learned in hierarchy mode. Info section in the Client view The Info section in the Client view displays the following information: l Name-Displays the name of the client. l IP Address-Displays the IP address of the client. l MAC Address-Displays MAC address of the client. l OS-Displays the operating system that is running on the client. l ESSID-Indicates the network to which the client is connected. l Access Point-Indicates the W-IAP to which the client is connected. l Channel-Indicates the channel that is currently used by the client. l Type-Displays the channel type on which the client is broadcasting. l Role-Displays the role assigned to the client. RF Dashboard The RF Dashboard section lists the W-IAPs that exceed the utilization, noise, or error threshold. It also shows the clients with low speed or signal strength in the network and the RF information for the W-IAP to which the client is connected. The W-IAP names are displayed as links. When a W-IAP is clicked, the W-IAP configuration information is displayed in the Info section and the RF Dashboard section is displayed on the Instant main window. The following figure shows an example of the RF dashboard with Utilization, Band frames, Noise Floor, and Errors details: Figure 11 RF Dashboard in the Monitoring Pane The following table describes the icons available on the RF Dashboard pane: Dell Networking W-Series Instant 6.5.1.0-4.3.1.0 | User Guide Instant User Interface | 40