Dell W-Series 334 Instant 6.5.1.0-4.3.1.0 User Guide - Page 380

Configuring a Network Authentication Profile You can configure a network authentication profile to define the authentication type used by the hotspot network. To configure a network authentication profile: (Instant AP)(config)# hotspot anqp-nwk-auth-profile (Instant AP)(network-auth )# nwk-auth-type (Instant AP)(network-auth )# url (Instant AP)(network-auth )# enable (Instant AP)(network-auth )# end (Instant AP)# commit apply You can specify any of the following network authentication type for the nwk-auth-type command: l accept-term-and-cond-When configured, the network requires the user to accept terms and conditions. This option requires you to specify a redirection URL string as an IP address, FQDN or URL. l online-enrollment-When configured, the network supports the online enrollment. l http-redirect-When configured, additional information on the network is provided through HTTP/HTTPS redirection. l dns-redirect-When configured, additional information on the network is provided through DNS redirection. This option requires you to specify a redirection URL string as an IP address, FQDN, or URL. Configuring a Roaming Consortium Profile You can configure a roaming consortium profile to send the roaming consortium information as an ANQP IE in a GAS query response. To configure a roaming consortium profile: (Instant AP)(config)# hotspot anqp-roam-cons-profile (Instant AP)(roaming-consortium )# roam-cons-oi (Instant AP)(roaming-consortium )# roam-cons-oi-len (Instant AP)(roaming-consortium )# enable (Instant AP)(roaming-consortium )# end (Instant AP)# commit apply Specify a hexadecimal string of 3-5 octets for roam-cons-oi . Based on the Organization Identifier (OI) specified, you can specify the following parameters for the length of OI in roam-cons-oi-len . l For 0: 0 Octets in the OI (Null) l For 3: OI length is 24-bits (3 Octets) l For 5: OI length is 36-bits (5 Octets) Configuring a 3GPP Profile You can configure a 3rd Generation Partnership Project (3GPP) profile to define information for the 3G Cellular Network for hotspots. To configure a 3GPP profile: (Instant AP)(config)# hotspot anqp-3gpp-profile (Instant AP)(3gpp )# 3gpp-plmn1 (Instant AP)(3gpp )# enable (Instant AP)(3gpp )# end (Instant AP)# commit apply The Public Land Mobile Network (PLMN) ID is a combination of the mobile country code and network code. You can specify up to 6 PLMN IDs for a 3GPP profile. 380 | Hotspot Profiles Dell Networking W-Series Instant 6.5.1.0-4.3.1.0 | User Guide