Dell W-Series 334 Instant 6.5.1.0-4.3.1.0 User Guide - Page 123
Table 26, Enabled, Accounting mode, Authentication, Association
![]() |
View all Dell W-Series 334 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Table 26: Internal Captive Portal Configuration Parameters Parameter Description l Select New for configuring a new external RADIUS or LDAP server for authentication. Load balancing Select Enabled to enable load balancing if two authentication servers are used. Reauth interval Select a value to allow the W-IAPs to periodically reauthenticate all associated and authenticated clients. Blacklisting (Applicable for WLAN SSIDs only.) If you are configuring a wireless network profile, select Enabled to enable blacklisting of the clients with a specific number of authentication failures. Accounting mode (Applicable for WLAN SSIDs only) Select an accounting mode from the Accounting mode drop-down list for posting accounting information at the specified accounting interval. When the accounting mode is set to Authentication, the accounting starts only after client authentication is successful and stops when the client logs out of the network. If the accounting mode is set to Association, the accounting starts when the client associates to the network successfully and stops when the client is disconnected. Dell Networking W-Series Instant 6.5.1.0-4.3.1.0 | User Guide Captive Portal for Guest Access | 123
![](/manual_guide/products/dell-wseries-334-instant-65104310-user-guide-7cff9ad/123.png)