Dell XPS 15 7590 XPS 15 Service Manual - Page 13
Removing the base cover, Procedure
View all Dell XPS 15 7590 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
3 Removing the base cover NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1. Close the display, and turn the computer over. 2. Turn the system badge over and remove the two screws (M2x8.5) that secure the base cover to the palm-rest assembly. 3. Remove the 10 screws (M2x3 T5) that secure the base cover to the palm-rest assembly. Figure 1. Removing the base cover a. base cover b. system badge c. screws (12) 4. Using a plastic scribe, gently pry the base cover off the palm-rest assembly. Removing the base cover 13