Dell XPS 15 7590 XPS 15 Service Manual - Page 36

Removing the wireless card, Prerequisites, Procedure

Page 36 highlights

19 Removing the wireless card NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1. Remove the base cover. 2. Remove the battery (half-length) or the battery (full-length). Procedure 1. Loosen the captive screw that secures the wireless-card bracket to the wireless card. 2. Lift the wireless-card bracket off the wireless card. 3. Disconnect the antenna cables from the wireless card. 4. Slide and remove the wireless card out of the wireless-card slot. Figure 16. Removing the wireless card 1. captive screw 3. wireless card 2. wireless-card bracket 4. antenna cables (2) 36 Removing the wireless card

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89

Removing the wireless card
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
After
working inside your computer
. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance
.
Prerequisites
1.
Remove the
base cover
.
2.
Remove the
battery (half-length)
or the
battery (full-length)
.
Procedure
1.
Loosen the captive screw that secures the wireless-card bracket to the wireless card.
2.
Lift the wireless-card bracket off the wireless card.
3.
Disconnect the antenna cables from the wireless card.
4.
Slide and remove the wireless card out of the wireless-card slot.
Figure 16. Removing the wireless card
1.
captive screw
2.
wireless-card bracket
3.
wireless card
4.
antenna cables (2)
19
36
Removing the wireless card