Dell XPS 15 7590 XPS 15 Service Manual - Page 43

Replacing the heat sink, Procedure, Post-requisites

Get Dell XPS 15 7590 PDF manuals and user guides View all Dell XPS 15 7590 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

24 Replacing the heat sink NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. CAUTION: Incorrect alignment of the heat sink can damage the system board and processor. NOTE: If either the system board or the heat sink is replaced, use the thermal pad/paste provided in the kit to ensure that thermal conductivity is achieved. Procedure 1. Align the screw holes on the heat sink with the screw holes on the system board. 2. In sequential order (indicated on the heat sink), replace the four screws (M2x3) that secure the heat sink to the system board. NOTE: For configurations shipped with integrated graphics, the heat sink has only three screws (M2x3). Post-requisites 1. Replace the battery (half-length) or the battery (full-length). 2. Replace the base cover. Replacing the heat sink 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
Replacing the heat sink
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
After
working inside your computer
. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance
.
CAUTION:
Incorrect alignment of the heat sink can damage the system board and processor.
NOTE:
If either the system board or the heat sink is replaced, use the thermal pad/paste provided in the kit to ensure
that thermal conductivity is achieved.
Procedure
1.
Align the screw holes on the heat sink with the screw holes on the system board.
2.
In sequential order (indicated on the heat sink), replace the four screws (M2x3) that secure the heat sink to the system board.
NOTE:
For configurations shipped with integrated graphics, the heat sink has only three screws (M2x3).
Post-requisites
1.
Replace the
battery (half-length)
or the
battery (full-length)
.
2.
Replace the
base cover
.
24
Replacing the heat sink
43