Dell XPS 15 7590 XPS 15 Service Manual - Page 69
Removing the palm-rest assembly, Prerequisites, Procedure
![]() |
View all Dell XPS 15 7590 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
45 Removing the palm-rest assembly NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites NOTE: Remove the SD card before removing the palm-rest assembly to avoid damage to the SD card. 1. Remove the base cover. 2. Remove the battery (half-length) or the battery (full-length). 3. Remove the memory modules. 4. Follow the procedure from step 1 to step 4 in "Removing the hard drive". 5. Remove the solid-state drive (half-length) or the solid-state drive (full-length). 6. Remove the speakers. 7. Remove the wireless card. 8. Remove the fans. 9. Remove the heat sink. 10. Remove the system-board assembly. 11. Remove the keyboard. 12. Remove the fingerprint reader daughter-board (optional). 13. Remove the display assembly. 14. Remove the power-adapter port. Procedure After performing the steps in the prerequisites we are left with the palm-rest assembly. Figure 36. Removing the palm-rest assembly 1. palm-rest assembly Removing the palm-rest assembly 69
![](/manual_guide/products/dell-xps-15-7590-xps-15-service-manual-099699e/69.png)