Dell XPS 15 7590 XPS 15 Service Manual - Page 21
Replacing the battery (full-length), Lithium-ion battery precautions, Procedure, Post-requisites
View all Dell XPS 15 7590 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
8 Replacing the battery (full-length) NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Lithium-ion battery precautions CAUTION: • Exercise caution when handling Lithium-ion batteries. • Discharge the battery as much as possible before removing it from the system. This can be done by disconnecting the AC adapter from the system to allow the battery to drain. • Do not crush, drop, mutilate, or penetrate the battery with foreign objects. • Do not expose the battery to high temperatures, or disassemble battery packs and cells. • Do not apply pressure to the surface of the battery. • Do not bend the battery. • Do not use tools of any kind to pry on or against the battery. • Ensure any screws during the servicing of this product are not lost or misplaced, to prevent accidental puncture or damage to the battery and other system components. • If the battery gets stuck inside your computer as a result of swelling, do not try to release it as puncturing, bending, or crushing a lithium-ion battery can be dangerous. In such an instance, contact Dell technical support for assistance. See www.dell.com/contactdell. • Always purchase genuine batteries from www.dell.com or authorized Dell partners and resellers. Procedure NOTE: The hard drive is not available on systems shipped with 6-cell (full-length) battery. 1. Align the screw holes on the battery with the screw holes on the palm-rest assembly. 2. Replace the seven screws (M2x4) that secure the battery to the palm-rest assembly. 3. Connect the battery cable to the system board. Post-requisites Replace the base cover. Replacing the battery (full-length) 21