Dell XPS 15 7590 XPS 15 Service Manual - Page 39
Removing the fans, Prerequisites, Procedure - laptop
View all Dell XPS 15 7590 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
21 Removing the fans NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1. Remove the base cover. 2. Remove the battery (half-length) or the battery (full-length). Procedure 1. Remove the two screws (M2x4) that secure the right fan to the system-board assembly. 2. Disconnect the touch-screen cable (optional) from the system-board assembly. NOTE: The touch-screen cable is available only on laptop configurations with touch displays. 3. Peel off the tape that secures the touch-screen cable (optional) to the right fan. 4. Peel off the tape that secures the touch-screen cable (optional) to the system board. 5. Disconnect the right fan cable (JFAN2) from the system-board assembly. 6. Lift the right fan off the palm-rest assembly. Figure 18. Removing the right fan 1. tape 3. fan cable (JFAN2) 5. screws (2) 2. touch-screen cable (optional) 4. right fan 7. Remove the two screws (M2x4) that secure the display-cable bracket to the system-board assembly. Removing the fans 39