Dell XPS 15 7590 XPS 15 Service Manual - Page 55
Replacing the power-button module, Procedure, Post-requisites
View all Dell XPS 15 7590 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
34 Replacing the power-button module NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1. Align and place the power-button module on the palm-rest assembly. 2. Replace the two screws (M1.6x3) that secure the power-button module to the palm-rest assembly. Post-requisites NOTE: The fingerprint reader is available depending on the configuration ordered. 1. Replace the system-board assembly. 2. Replace the fans. 3. Replace the heat sink. 4. Replace the wireless card. 5. Replace the solid-state drive (half-length) or the solid-state drive (full-length). 6. Follow the procedure from step 3 to step 6 in "Replacing the hard drive". 7. Replace the memory modules. 8. Replace the battery (half-length) or the battery (full-length). 9. Replace the base cover. Replacing the power-button module 55