Denon 4802R Owners Manual
Denon 4802R - 7 Channel Surround Receiver Manual
 |
UPC - 081757505345
View all Denon 4802R manuals
Add to My Manuals
Save this manual to your list of manuals |
Denon 4802R manual content summary:
- Denon 4802R | Owners Manual - Page 1
AV SURROUND RECEIVER AVR-4802R OPERATING INSTRUCTIONS INPUT SELECTOR ON/STANDBY HOME THX CINEMA PURE DIRECT REMOTE SENSOR ON/STANDBY SIGNAL DIGITAL SURROUND BACK CH PURE SIGNAL DIRECT OUTPUT DETECT INPUT AUTO PCM DTS A B SURROUND SPEAKER ES DSCRT DVD VOLUME LEVEL DIGITAL MASTER - Denon 4802R | Owners Manual - Page 2
product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions interference received, - Denon 4802R | Owners Manual - Page 3
proper ventilation is provided or the manufacturer's instructions have been adhered to. 11. Power Sources - This product should be operated only from the type of -20) GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) 13. Power-Cord - Denon 4802R | Owners Manual - Page 4
Troubleshooting 76 ⁄6 Additional Information 77~88 ⁄7 Specifications 89 2 ACCESSORIES Check that the following parts are included in addition to the main unit: q Operating instructions 1 w Warranty ( for North America model only )........1 e Service station list 1 t AC cord ........1 y Remote - Denon 4802R | Owners Manual - Page 5
added: the THX Ultra2 Cinema mode and the THX Music mode. 6. THX Surround EX The AVR-4802R is fully compatible with THX Surround EX, the latest surround format. 7. DTS-ES Extended Surround and DTS Neo:6 The AVR-4802R is compatible with DTS-ES Extended Surround, a new multi-channel format developed - Denon 4802R | Owners Manual - Page 6
sound channels, or for connection to between on and standby from the remote control unit. No power is . AV 120V 60Hz Extension jacks for future use Ground wire Connecting a turntable Connect the turntable's output cord to the AVR-4802R's to page 28 for instructions on setting this terminal. - Denon 4802R | Owners Manual - Page 7
When making connections, also refer to the operating instructions of the other components. AUDIO VIDEO OUT R OUT-2 jack. Note, however, that the AVR-4802R's onscreen display signals are not output from this OUTLETS OUT RS-232C SWITCHED TOTAL 120W (1A) MAX. AV 120V 60Hz R SW 1 2 3 1 2 3 - Denon 4802R | Owners Manual - Page 8
make connections according to the equipment's instruction manuals. S-VIDEO OUT DVD player or video -2 jack. Note, however, that the AVR4802R's on-screen display signals are not output from this 2 POWER AMP OUT OUT IN ROOM TO ROOM REMOTE CONTROL Connecting the video decks • Connect the video - Denon 4802R | Owners Manual - Page 9
not output to the color difference (component) video jacks. • The AVR-4802R's on-screen display signals are not output from the color difference and Y", "Cr, Cb and Y", etc.). For details, carefully read the operating instructions included with the TV or other component. IN DVD IN TV IN DBS/ - Denon 4802R | Owners Manual - Page 10
VDP TV SL SURROUND -B R SB / MULTI R SBR ANTENNA SIGNAL PHONO GND L SBL I CD DVD VDP TV POWER AMP OUT OUT IN ROOM TO ROOM REMOTE CONTROL R EXT. IN FRONT CENTER SURROUND SB L R SW AM OUTDOOR ANTENNA GROUND AM loop antenna assembly Connect to the AM antenna terminals. 1 2 3 Remove - Denon 4802R | Owners Manual - Page 11
, or a component with a different type of multi-channel decoder, such as a Super Audio DVD player, or a multi-channel SACD player, or other future multi-channel sound format decoder. • When making connections, also refer to the operating instructions of the other components. SURROUND -A R DVD VDP - Denon 4802R | Owners Manual - Page 12
> with > ). Mismatching of polarities will result in weak central sound, unclear orientation of the various instruments, and the sense of direction of though there are no problems with the wiring or the ventilation around the unit, switch off the power and contact a DENON service center. Note on - Denon 4802R | Owners Manual - Page 13
instructions MULTI L AC OUTLETS POWER AMP OUT OUT IN ROOM TO ROOM REMOTE CONTROL R EXT. IN FRONT CENTER SURROUND SB L R SW DIGITAL 5 COAXIAL OPTICAL SWITCHED TOTAL 120W (1A) MAX. AV 120V 60Hz • Precautions when placing speakers If a speaker channel. (L) (R) SURROUND SPEAKER SYSTEMS (B) 13 - Denon 4802R | Owners Manual - Page 14
INPUT SELECTOR ON/STANDBY HOME THX CINEMA PURE DIRECT REMOTE SENSOR ON/STANDBY SIGNAL DIGITAL SURROUND BACK CH PURE SIGNAL DIRECT OUTPUT DETECT TONE DEFEAT button 50) @2 SURROUND PARAMETER button 59) @3 Channel Volume button (CH VOL 56) @4 MASTER VOLUME control 48) @5 Master volume - Denon 4802R | Owners Manual - Page 15
) Mode selector buttons 34) Input source selectorbuttons.....(34~37, 47) Remote control signal transmitter 33) Power buttons 35, 46) MAIN ZONE buttons buttons 48, 53) MUTING button 51) SURROUND PARAMETER button 36, 59) CH SELECT/ENTER button 16, 36, 56) RETURN button 36) SURROUND SPEAKER/ - Denon 4802R | Owners Manual - Page 16
room's AV system centered around the AVR-4802R. • Use the following buttons to set up the system: • Check that the remote control channels in order to obtain optimum effects. Boundary Gain compensation When using a THX Ultra2 compatible subwoofer, set the subwoofer's frequency response. LFE -THX - Denon 4802R | Owners Manual - Page 17
TV monitor is connected to both the AVR-4802R's S-Video and video monitor output jacks and signals are input to the AVR4802R from a video source (VDP, etc systems Two surround back speakers are required to use the THX Ultra2 Cinema and THX Music modes. Set the surround back speakers so that the - Denon 4802R | Owners Manual - Page 18
. 1 (Main unit) 2 Display the System Setup Menu. Setting the type of speakers • The composition of the signals output to the different channels and the frequency response are adjusted automatically according to the combination of speakers actually being used. 1 At the System Setup Menu select - Denon 4802R | Owners Manual - Page 19
to be used for the surround back channel. If the subwoofer has sufficient low frequency playback capacity, good sound can be achieved even when "Small" is set for the front, center and surround speakers. To take full advantage of the performance of the Home THX - Denon 4802R | Owners Manual - Page 20
instead the cut bass sound is output from the subwoofer or speakers which are set to "Large". • This crossover frequency mode is valid when "Subwoofer" is set to "Yes" at "Speaker Configuration Setting" or when speakers are set to "Small". FIXED -THX-: Set to the THX rated 80 Hz crossover frequency - Denon 4802R | Owners Manual - Page 21
frequency signal range of channels set to "Large" are produced simultaneously from those channels and the subwoofer channel. In this playback mode and B. • Two surround back speakers are required to use the THX Ultra2 Cinema and THX Music modes. Set the surround back speakers so that the distance - Denon 4802R | Owners Manual - Page 22
blinking speaker(s) so that its distance is no larger than the value shown in highlighted line. 7 Enter the setting. The System Setup Menu reappears. The AVR-4802R automatically sets the optimum surround delay time for the listening room. 22 - Denon 4802R | Owners Manual - Page 23
playback levels can be adjusted separately. 1 At the System Setup Menu select "Channel Level". 2 Switch to the Channel Level screen. 3 Select "Test Tone Mode". 4 Select the mode. Select "Auto" or "Manual". • Auto: Adjust the level while listening to the test tones produced automatically - Denon 4802R | Owners Manual - Page 24
while the test tone is being produced from the subwoofer b. When the "Manual" mode is selected Use the CURSOR left and right to select the speaker surround sound mode, your preferred channel level adjustments for just that mode will be recalled. Check the instructions for adjusting channel levels - Denon 4802R | Owners Manual - Page 25
button. 4 When using a THX Ultra2 compatible subwoofer or subwoofer that frequency response extends to 20 Hz, select "Yes". Otherwise select "No". • When "Yes" is selected "Boundary Gain Compensation" can be selected and the compensation set to "OFF". • If the bass sound seems too strong Set - Denon 4802R | Owners Manual - Page 26
of the speakers. There is not displayed when "1spkr" selected. • This setting is necessary to achieve the optimum effect in the THX Surround EX, THX Ultra2 Cinema and THX Music modes. It is recommended that SBL/SBR speakers are placed together as close as possible. 1 Select "Surround Back Speaker - Denon 4802R | Owners Manual - Page 27
noise is distorted. The test noise (bass sound) is distorted when it sounds as if the input is excessively high (when the sound crackles). 6 Press the ENTER button at the point where the test noise starts sounding distorted. The AVR-4802R automatically sets the subwoofer peak limit level. This - Denon 4802R | Owners Manual - Page 28
digital recorder. Use this for digital recording between a digital audio source (stereo - 2 channel) and a digital audio recorder. • Do not connect the output of the component connected to the OPTICAL 4 OUT jack on the AVR-4802R's rear panel to any jack other than the OPTICAL 4 IN jack. • Do not - Denon 4802R | Owners Manual - Page 29
to the SB/MULTI speaker terminals. [1] Power amplifier assignment function setting Make this setting to switch the power amplifier for the surround back channel to Multi-zone. 1 At the System Setup Menu, select "Multi Zone Control". 2 Press the "ENTER" button to switch to the "Multi Zone Control - Denon 4802R | Owners Manual - Page 30
button. Variable: The level can be adjusted freely using the buttons on the remote control unit. -40 dB, 0 dB: The output level is fixed at the , this is not displayed when no digital signals are being input. For instructions on making the setting, refer to page 67. Setting the on-screen display - Denon 4802R | Owners Manual - Page 31
this to automatically search for FM broadcasts and store up to 40 stations at preset channels A1 to 8, B1 to 8, C1 to 8, D1 to 8 and E1 automatically due to poor reception, use the "Manual tuning" operation to tune in the station, then preset it using the manual "Preset memory" operation. 1 At the - Denon 4802R | Owners Manual - Page 32
settings • Tone control settings • Channel level settings (including test tones) no need to change them unless different AV components are connected or the speakers are . • On-screen display signals Signals input to the AVR-4802R VIDEO signal input jack (yellow) S-video signal input - Denon 4802R | Owners Manual - Page 33
used to operate not only the AVR-4802R but other remote control compatible DENON components as well. In addition, the memory contains the control signals for other remote control units, so it can be used to operate non-Denon remote control compatible products. Inserting the batteries q Remove the - Denon 4802R | Owners Manual - Page 34
DENON instructions. It may not be possible to operate some models. AMP 1 1. CD player (CD) system buttons 2. Tape deck (TAPE) system buttons 6, 7 : Manual Switch between AUTO and MANUAL MEMORY : Preset memory SHIFT : Switch preset channel range CHANNEL +, - : Preset channel up/down The tuner - Denon 4802R | Owners Manual - Page 35
models the remote control unit or the device may not operate properly. In this case, use the learning function (page 38) to store your device's remote control signals in the included remote control unit. For instructions , VCR1 HITACHI CD, MD, TAPE, CDR, VDP, DVD DENON VCR2, DBS SONY CABLE ABC 35 - Denon 4802R | Owners Manual - Page 36
details, refer to the component's operating instructions. Some models cannot be operated with this remote control unit. 1. Digital video disc 6,7 : Manual search (forward and reverse) 2 : Stop 1 : Play 8,9 : Auto search (cue) 3 : Pause 0~9, +10 : 10 key DVD preset codes B Model No. 0000 - Denon 4802R | Owners Manual - Page 37
3. Video deck (VCR1/VCR2) system buttons POWER : Power on/standby (ON/SOURCE) 6,7 : Manual search (forward and reverse) 2 : Stop 1 : Play 3 : Pause Channel +, - : Channels VCR1 4. Monitor TV (TV), digital broadcast satellite (DBS) tuner and cable (CABLE) system TV buttons POWER : - Denon 4802R | Owners Manual - Page 38
Learning function If your AV component is not a Denon product or if it cannot be operated using the preset memory, it can be controlled with the accessorious remote control unit by storing its remote control signals in the remote control unit. For some remote control signals it is not possible to " - Denon 4802R | Owners Manual - Page 39
control unit is equipped with "system call" function allowing a series of remote control signals to be transmitted by pressing a single button. This function can be used for example to turn on the receiver's power, select the input source, turn on the monitor TV's power, turn on the source component - Denon 4802R | Owners Manual - Page 40
punch through mode in the AMP mode, the CD mode's PLAY, STOP, MANUAL SEARCH, AUTO SEARCH, PAUSE and DISC SKIP buttons' signals are sent in punch through setting, then press the ENTER button. • "SEL" appears on the remote control unit's display. 4 Use the • and ª cursor buttons to display the - Denon 4802R | Owners Manual - Page 41
control unit's display. 2 Use the • and ª cursor buttons to display "BKLT" on the remote control unit, then press the ENTER button. • "05SEC" appears on the remote control unit's display. 3 Use the • and ª cursor buttons to adjust the lighting time (3 sec ~ 30 sec), then press the ENTER button - Denon 4802R | Owners Manual - Page 42
unit's display, then press the ENTER button. • "PRE" is displayed. 1 DVD 1 3 Use the • and ª cursor buttons to display "LRN" on the remote control unit's display, then press the ENTER button. • "SEL" is displayed. 2, 3, 4 2, 3, 4 4 Use the • and ª cursor buttons to select the mode of - Denon 4802R | Owners Manual - Page 43
control unit's display. 2, 3, 4 2, 3, 5 4 Press the • and ª cursor buttons to select the system call setting to be reset. The remote control unit's display switches as shown below each time the • and ª cursor buttons are pressed. CALL 1 CALL 2 5 To reset CALL 1 or CALL 2, select "CALL 1" or - Denon 4802R | Owners Manual - Page 44
the power ON/SOURCE button and the OFF button at the same time. • "PRE" appears on the remote control unit's display. 2 Use the • and ª cursor buttons to display "RST" on the remote control unit, then press the ENTER button. 1 DVD 1 3 Use the • and ª cursor buttons to display "PUNCH" on - Denon 4802R | Owners Manual - Page 45
. 1 Press the power ON/SOURCE button and the OFF button at the same time. "PRE" appears on the remote control unit's display. 2 Use the • and ª cursor buttons to display "RST" on the remote control unit, then press the ENTER button. 3 Use the • and ª cursor buttons to display "ALL" on the - Denon 4802R | Owners Manual - Page 46
3 Turn on the power. Press the POWER switch (button). ON / STANDBY ON/STANDBY Light (Main unit) (Remote control unit) • When pressed, the power turns on and the display lights. The sound is muted for several seconds, after which the unit operates normally. • When pressed again, the power turns - Denon 4802R | Owners Manual - Page 47
PCM DTS INPUT MODE (Main unit) (Remote control unit) 2 Input mode selection function Different source are detected and the program in the AVR-4802R's surround decoder is selected automatically upon playback. in DTS, Dolby Digital or PCM (2 channel stereo) format. If no digital signal is - Denon 4802R | Owners Manual - Page 48
instructions, refer to the component's manual. 5 Adjust the volume. MASTER VOLUME The volume level is displayed on the master volume level display. (Main unit) (Remote control unit) The volume can be adjusted within the range of -70 to 0 to 18 dB, in steps of 1 dB. However, when the channel - Denon 4802R | Owners Manual - Page 49
21 2 1 (Main unit) (Remote control unit) • When the input , DOLBY/DTS SURROUND, HOME THX CINEMA, WIDE SCREEN, 5CH/7CH sound, select the input source to which the video signal is connected, then set this mode. Playing audio sources (CDs and DVDs) The AVR-4802R is equipped with three 2-channel - Denon 4802R | Owners Manual - Page 50
channel sound while watching images. In this mode, the audio signals bypass such circuits as the tone circuit and are transmitted directly, resulting in good quality sound. DIRECT 4 VIDEO ON/OFF button When no video signals of a DVD, etc., are connected to the AVR-4802R to "FIXED-THX-" in the - Denon 4802R | Owners Manual - Page 51
to turn off the audio output temporarily. Press the MUTE button. Cancelling MUTING mode. Press the MUTE button again. (Remote control unit) [4] Combining the currently playing sound with the desired image 1 1 Simulcast playback Use this switch to monitor a video source other than the audio - Denon 4802R | Owners Manual - Page 52
(Main unit) 3 Set the recording mode. • For operating instructions, refer to the manual of the component on which you want to record. 4 To to record Dolby Digital and DTS multichannel signals converted into 2-channel analog signals. • The recording signals are output to the Remote control unit) - Denon 4802R | Owners Manual - Page 53
source light. • When the AVR-4802R is in the REC OUT mode, the source cannot be output using the "MULTI" mode on the remote control unit. (Main unit) SELECT (Main unit) 3 Start playing the source to be output. • For operating instructions, refer to the manuals of the respective components - Denon 4802R | Owners Manual - Page 54
operating instructions. MULTI ROOM MUSIC ENTERTAINMENT SYSTEM [1] When the MULTI ZONE terminal output is set to "Variable". The AVR-4802R is REMOTE CONTROL UNIT RC-617 RC-616 AVR-4802R REMOTE CONTROL UNIT When connected as shown on the diagram below using connection cords included with Denon - Denon 4802R | Owners Manual - Page 55
played from the speakers connected to the MULTI speaker terminals. ANOTHER ROOM MAIN ROOM RC-617 AVR-4802R REMOTE CONTROL UNIT RC-616 NOTE: When the main unit is set to the recording output mode, remote control unit keys indicated "MULTI" mode cannot be operated. (See page 53.) Room to Room - Denon 4802R | Owners Manual - Page 56
the remote control unit using the test tones is only possible in the "Auto" mode and only effective in the DOLBY/DTS SURROUND and HOME THX adjust the levels of the various channels. 1 MAIN UNIT: Press the CH VOL button and select "CH VOL". CH VOL REMOTE CONTROL UNIT: Select the speaker whose - Denon 4802R | Owners Manual - Page 57
to adjust the balance of the sound from the different positions when playing multi-channel music sources. 1 MAIN UNIT: Press the CH VOL button, and select "FADER". CH VOL REMOTE CONTROL UNIT: Select "FADER". (Main unit) (Remote control unit) The channel switches in the order shown below - Denon 4802R | Owners Manual - Page 58
below in order to achieve the maximum effect for the specific signal source. Sources recorded in Dolby Digital Surround EX is a 6.1-channel/7.1-channel surround mode. THX SURROUND EX • Maximum performance for playing movies on the AVR-4802R. DOLBY DIGITAL EX • This mode is optimized for playing - Denon 4802R | Owners Manual - Page 59
input mode to "AUTO". INPUT MODE (Main unit) (Remote control unit) 2 Select the Home THX mode. HOME THX CINEMA (Main unit) (Remote control unit) 3 Play a program source with the mark. • For operating instructions, refer to the manuals of the respective components. 4 Adjust the volume - Denon 4802R | Owners Manual - Page 60
No signal is played from the surround back channels. THX Surround EX.....Dolby Digital signals are played in the THX Surround EX mode. Ultra2 Cinema..........The signals are played in the THX Ultra2 Cinema mode. Music Mode The signals are played in the THX Music mode. ES MTRX When playing DTS - Denon 4802R | Owners Manual - Page 61
" (page 62). 33 2 Select the Home THX Cinema mode. HOME THX CINEMA (Main unit) (Remote control unit) 3 Play a program source with the , mark. For operating instructions, refer to the manuals of the respective components. The channel status information during playback of Dolby Digital and - Denon 4802R | Owners Manual - Page 62
unit) w Set the input mode to "AUTO". INPUT MODE 1-w 2 4, 5 5 (Main unit) 2 Select the Surround mode. DOLBY / DTS (Remote control unit) (Main unit) (Remote control unit) 3 Play a program source with the , mark. DIGITAL Light • The Dolby Digital indicator lights when playing Dolby - Denon 4802R | Owners Manual - Page 63
remote control button. • When "Default" is selected and the 0 cursor button is pressed, "CINEMA EQ." and "D.COMP." are automatically turned off, "SB CH OUT" is reset, "CHANNEL very soft and very loud sounds). For listening late at night, or whenever the maximum sound level is lower than usual, - Denon 4802R | Owners Manual - Page 64
. Light 1 2 5 4, 6 5, 6 1 2 4 5, 6 3 Play a program source with the mark. • For operating instructions, refer to the manuals of the respective components. 4 Select the surround parameter mode. SURROUND PARAMETER (Main unit) (Remote control unit) 5 Select the optimum mode for the source - Denon 4802R | Owners Manual - Page 65
the mode. q Select the parameter. w Select the setting. SURROUND PARAMETER SELECT (Main unit) (Remote control unit) 7 Set the various surround parameters. • CINEMA EQ setting (Main unit) (Remote control unit) NOTE: • When making parameter settings, the display will return to the regular - Denon 4802R | Owners Manual - Page 66
DTS Neo:6 mode Surround playback can be conducted for the analog input and PCM digital input 2-channel signals. 1 Select the DTS NEO:6 mode. DOLBY / DTS (Main unit) (Remote control unit) 2 Play a program source. 3 Display the Surround Parameter Menu. SURROUND PARAMETER (Main unit) ( - Denon 4802R | Owners Manual - Page 67
) With a movie source, for example, adjust so that the movement of the actors' lips is synchronized with the sound. 6 Enter the setting. The System Setup Menu reappears. (Remote control unit) 7 Press the SYSTEM SETUP button to complete the setting. NOTE: The audio delay setting does not apply - Denon 4802R | Owners Manual - Page 68
DENON ORIGINAL SURROUND MODES • The AVR-4802R is equipped with a built-in high performance DSP (digital signal processor) that uses digital processing to recreate sound sources are played in the 7.1-channel mode, including Dolby Pro Logic and Dolby Digital 5.1-channel sources. Effects simulating the - Denon 4802R | Owners Manual - Page 69
surround mode for the input channel. DIRECT STEREO DOLBY / DTS SURROUND MODE WIDE SCREEN 5CH / 7CH STEREO DSP SIMULATION (Main unit) (Remote control unit) The surround mode the different surround modes in terms of the size of the sound field, not the actual size of the listening room. 69 - Denon 4802R | Owners Manual - Page 70
Remote control unit) the Direct, Pure Direct and Home THX Cinema mode. 2 Select "TONE". (Remote control unit) 3 Switch to the Tone Control screen. 1, 6 2, 3, 4 5 (Remote the bass or treble: Turn the control clockwise. (The bass or treble sound can be increased to up to +12 dB in steps of 2 - Denon 4802R | Owners Manual - Page 71
the SL and SR channels, respectively. LEVEL: This parameter sets the strength of the effect signals in the WIDE SCREEN mode. It can be set in 15 steps, from "1" to "15". Set this to a low level if the positioning or phase of the surround signals sounds unnatural. SB CH OUT: "ON Playback is - Denon 4802R | Owners Manual - Page 72
(5.1 ch) DTS (6.1 ch) D. D. (2 ch) D. D. (5.1 ch) C C C C C C C C C C C C C C THX THX ✳ES MTRX6.1 + THX ✳ES MTRX6.1 + THX B ES DSCRT6.1 + THX THX ✳THX SURROUND EX THX Ultra2 Cinema THX Ultra2 Cinema ES MTRX6.1 + THX THX Ultra2 Cinema THX Music Mode THX Music Mode THX Music - Denon 4802R | Owners Manual - Page 73
frequencies, the noise is muted and the "TUNED" and (Remote control unit) "STEREO" indicators turn off. • When the manual tuning mode is set, FM stereo broadcasts are 3 Press the MODE button to set the manual tuning mode. received in monaural and the "STEREO" indicator turns off. Check that - Denon 4802R | Owners Manual - Page 74
unit) 5 Press the MEMORY button again to store the station in the preset memory. (Remote control unit) To preset other channels, repeat steps 2 to 5. A total of 40 broadcast stations can be preset - 8 stations (channels 1 to 8) in each of blocks A to E. Checking the preset stations • The preset - Denon 4802R | Owners Manual - Page 75
the display, press the SHIFT button to select the preset memory block. 1 (Remote control unit) 2 Watching the display, press the CHANNEL + (up) or - (down) 2 button to select the desired preset channel. (Remote control unit) • Recalling preset stations from the main unit's panel. 1 TUNING - Denon 4802R | Owners Manual - Page 76
TROUBLESHOOTING If a problem should arise,first check the following. 1. Are the connections correct ? 2. Have you operated the receiver according to the Operating Instructions dts sound is produced. stream. • DVD player is not dts-compatible. • Use a dts-compatible player. - • AVR-4802R's input - Denon 4802R | Owners Manual - Page 77
signals (Japan MUSE Hi-Vision audio), DVD-Audio, SACD (Super Audio CD), MPEG multi-channel audio, etc. "Source" here does not refer to the type of signal (format) but , are required in order to achieve the ideal sound. The AVR-4802R's surround speaker selection function makes it possible to - Denon 4802R | Owners Manual - Page 78
EX system FL SW C FR SL ch SR ch SL ch SR ch Movement of acoustic image from SR to SL SB ch Movement of acoustic image from SR to SB to SL Speaker(s) for one or two channels are required in order to achieve a THX Surround EX system with the AVR-4802R. Adding these, however, allows you to - Denon 4802R | Owners Manual - Page 79
guides to set up your system according to the type of speakers used and the main usage purpose. 1. For THX Consult the owner's manual for your the surround speaker A jacks on the AVR-4802R and set all settings on the setup the side surround sound presentation. For multi-channel music sources - Denon 4802R | Owners Manual - Page 80
AVR-4802R, the surround speakers for playing multi-channel music to the surround speaker B jacks. Set the surround speaker selection on the setup menu. (For instructions listening position than the front speakers. • Consult the owner's manual for your subwoofer for advice on placing the subwoofer - Denon 4802R | Owners Manual - Page 81
, softest sounds, free from noise and distortion. 2 Dolby Digital and Dolby Pro Logic Comparison of home surround systems No. recorded channels (elements) No. playback channels Playback channels (max.) Audio processing High frequency playback limit of surround channel Dolby Digital 5.1 ch 5.1 ch - Denon 4802R | Owners Manual - Page 82
stereo equipment, in which case they provide normal stereo sound. There are two types of DVD Dolby surround recording signals. q 2-channel PCM stereo signals w 2-channel Dolby Digital signals When either of these signals is input to the AVR-4802R, the surround mode is automatically set to Dolby Pro - Denon 4802R | Owners Manual - Page 83
so this problem does on the AVR-4802R (see page DENON DVD player models feature DTS-compatible digital output - consult the player's owner's manual channels are fully independent, the sound channel format, so the DTS-ES Matrix 6.1 mode must be set manually to play these sources. (For instructions - Denon 4802R | Owners Manual - Page 84
is a multi-channel digital signal format sound from the movie theater environment into the home, correcting the tonal and spatial errors that occur. On the AVR-4802R, when the Home THX Cinema mode is on, THX product feature the THX Ultra2 logo, which is your guarantee that the Home Theater products - Denon 4802R | Owners Manual - Page 85
you are watching is encoded in Surround EX, you can manually select the THX Surround EX playback mode, otherwise THX Ultra2 Cinema mode will apply processing to provide optimum replay. THX Music Mode For the replay of 5.1 multi-channel music the THX Music Mode should be selected. In this mode new - Denon 4802R | Owners Manual - Page 86
channels in order to obtain optimum effects. Boundary Gain compensation When using a THX Ultra2 compatible subwoofer, set the subwoofer's frequency response. LFE -THX on the remote control unit or main unit are operated (from MONITOR 1 outputs only). FM stations are received automatically and - Denon 4802R | Owners Manual - Page 87
DIRECT STEREO EXTERNAL INPUT WIDE SCREEN HOME THX CINEMA DOLBY PRO LOGIC II DOLBY DIGITAL DTS SURROUND DTS NEO:6 5/7CH STEREO SUPER STADIUM ROCK ARENA JAZZ CLUB CLASSIC CONCERT MONO MOVIE MATRIX Signals and adjustability in the different modes Channel output Parameter (default values are shown in - Denon 4802R | Owners Manual - Page 88
(5.1 ch) DTS (6.1 ch) D. D. (2 ch) D. D. (5.1 ch) C C C C C C C C C C C C C C THX THX ✳ES MTRX6.1 + THX ✳ES MTRX6.1 + THX B ES DSCRT6.1 + THX THX ✳THX SURROUND EX THX Ultra2 Cinema THX Ultra2 Cinema ES MTRX6.1 + THX THX Ultra2 Cinema THX Music Mode THX Music Mode THX Music - Denon 4802R | Owners Manual - Page 89
: 170 W x 2 ch (8 Ω/ohms) 270 W x 2 ch (4 Ω/ohms) 350 W x 2 ch (2 Ω/ohms) Output terminals 0 dBf = 1 x 10-15 W) [AM] Receiving Range: 87.5 MHz ~ 107.9 MHz 520 kHz 20.5 kg (45 lbs 3.1 oz) 2 Remote control unit (RC-932) Batteries: R6P/AA specifications and design are subject to change - Denon 4802R | Owners Manual - Page 90
16-11, YUSHIMA 3-CHOME, BUNKYOU-KU, TOKYO 113-0034, JAPAN Telephone: (03) 3837-5321 Printed in Japan 511 4020 007
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
 |
 |
AV SURROUND RECEIVER
AVR-4802R
OPERATING INSTRUCTIONS
AMP
MASTER VOLUME
INPUT SELECTOR
ON/STANDBY
THX CINEMA
HOME
PURE
DIRECT
SENSOR
REMOTE
ON/STANDBY
INPUT
SIGNAL
PCM
AUTO
DTS
DIRECT
PURE
DIGITAL
SURROUND SPEAKER
A
B
SURROUND BACK CH
OUTPUT
DETECT
SIGNAL
ES DSCRT DVD
VOLUME LEVEL
DIGITAL
2
We greatly appreciate your purchase of the AVR-4802R.
2
To be sure you take maximum advantage of all the features the AVR-4802R has to offer, read these instructions
carefully and use the set properly. Be sure to keep this manual for future reference should any questions or
problems arise.
“SERIAL NO.
PLEASE RECORD UNIT SERIAL NUMBER ATTACHED TO THE REAR OF THE
CABINET FOR FUTURE REFERENCE”