Denon 4802R Owners Manual - Page 53
M-zone Source - avr manual
UPC - 081757505345
View all Denon 4802R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
[3] Outputting a program source to an amplifier, etc., in a different room (MULTI mode) 1 Press the REC/MULTI button until "MZONE SOURCE" appears on the set's display. REC / MULTI 1, 2 2 Select the source you want to record appears on the set's display. • The MULTI indicator lights. • The indicator for the selected program source light. • When the AVR-4802R is in the REC OUT mode, the source cannot be output using the "MULTI" mode on the remote control unit. (Main unit) SELECT (Main unit) 3 Start playing the source to be output. • For operating instructions, refer to the manuals of the respective components. 4 To cancel, press the REC/MULTI button and select "SOURCE". REC / MULTI SELECT (Main unit) 1, 4 2, 4 Display 2 PHONO CD TUNER DVD / VDP TV / DBS MULTI VCR -1 -2 -3 V.AUX / TAPE M-ZONE SOURCE When "Multi" is selected for the system setup's multi-zone setting, the source selected here is output from the SB/MULTI speaker terminals. The volume can be adjusted and input source can be selected using the VOLUME + (up) and - (down) buttons on the remote control unit's "MULTI" mode. NOTES: • The signals of the source selected in the Multi mode are also output from the TAPE and VCR recording output terminals. • Digital signals are not output from the MULTI ZONE audio output jacks. [4] Remote control unit operations during multi-source playback (selecting the input source) This operation is possible when MULTI mode is selected. This operation is not possible in the REC OUT mode. 1 Select "MULTI" using the AMP button. 2 1 (Remote control unit) 2 Press the MULTI ZONE "ON" button. To cancel the MULTI mode. 3 Press the MULTI ZONE "OFF" button. (Remote control unit) 3 Press the input source button • The MULTI ZONE source switches directly. The main zone output can be turned on and off with the "MAIN ON/OFF" button. 5 4 The output level of the MULTI ZONE OUT terminals can be controlled using the VOLUME + (up) and - (down) buttons on the remote control unit. The output level of MULTI ZONE OUT can be controlled only if MULTI ZONE (Remote control unit) vol. level is set "Variable" at Multi Zone Control in System Setup Menu. (See page 29) DEFAULT SETTING (ZONE2 VOLUME LEVEL) : - - - dB (MINIMUM) 4 5 When the MULTI ZONE SOURCE function is set to TUNER, the preset channel can be selected using the CHANNEL + (up) and - (down) buttons on the remote control unit. (Remote control unit) 53