Denon 4802R Owners Manual - Page 28
Setting the Digital In Assignment, Switch to the Digital In Assignment screen.
UPC - 081757505345
View all Denon 4802R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Setting the Digital In Assignment • This setting assigns the digital input jacks of the AVR-4802R for the different input sources. 1 At the System Setup Menu select "Digital In Assignment". 2 Switch to the Digital In Assignment screen. 3 Select the digital input jack to be assigned to the input source. • To select the input source • To select the digital input jack Select "OFF" for input sources for which no digital input jacks are used. If "Yes" is selected for "Default", the settings are automatically reset to the default values. 4 Enter the setting. The System Setup Menu reappears. NOTES: • The OPTICAL 4 and 5 jacks on the AVR-4802R's rear panel are equipped with an optical digital output jack for recording digital signals on a DAT deck, MD recorder or other digital recorder. Use this for digital recording between a digital audio source (stereo - 2 channel) and a digital audio recorder. • Do not connect the output of the component connected to the OPTICAL 4 OUT jack on the AVR-4802R's rear panel to any jack other than the OPTICAL 4 IN jack. • Do not connect the output of the component connected to the OPTICAL 5 OUT jack on the AVR-4802R's rear panel to any jack other than the OPTICAL 5 IN jack. • "PHONO" and "TUNER" cannot be selected on the Digital In Assignment screen. 28