Denon 4802R Owners Manual - Page 69

DSP surround simulation 1 Select the surround mode for the input channel. DIRECT STEREO DOLBY / DTS SURROUND MODE WIDE SCREEN 5CH / 7CH STEREO DSP SIMULATION (Main unit) (Remote control unit) The surround mode switches in the following order each time the DSP SIMULATION button is pressed: WIDE SCREEN SUPER STADIUM ROCK ARENA JAZZ CLUB MATRIX CLASSIC CONCERT MONO MOVIE "WIDE SCREEN" is not displayed when the operation is performed with the buttons on the main unit. 2 Display the surround parameter screen on the monitor. The screen for the selected surround mode appears. SURROUND PARAMETER (Main unit) (Remote control unit) 1 2, 3 3 1 2, 4 3 3 Set the parameters. SURROUND PARAMETER SELECT (Main unit) (Remote control unit) 4 Press the SURROUND PARAMETER button to complete the setting. Stop pressing buttons (main unit) once you have completed setting the surround parameters. After several seconds the normal display reappears and the settings you have made are automatically set. (Remote control unit) NOTES: • When "Default" is selected and the 0 cursor button is pressed, "CINEMA EQ." and "D. COMP." are automatically set to "OFF". In addition, "ROOM SIZE" is set to "medium", "EFFECT LEVEL" to "10" and "DELAY TIME" to "30ms". • The "ROOM SIZE" expresses the expansion effect for the different surround modes in terms of the size of the sound field, not the actual size of the listening room. 69