Denon AVP-A1HDCI Owners Manual - English - Page 111
HD Radio Wireless LAN, General, Main remote control unit RC-1067, Sub remote control unit
![]() |
UPC - 883795000802
View all Denon AVP-A1HDCI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting Specifications Specifications n Audio section • Analog Input sensitivity / Input impedance: RCA Pre output (unbalanced) : 200 mV / 47 kΩ/kohms XLR Pre output (balanced) : 400 mV / 100 kΩ/kohms Frequency response: 10 Hz ~ 100 kHz +1, -3 dB (DIRECT mode) S/N: 102 dB (IHF-A weighted, DIRECT mode) Distortion: 0.005 % (20 Hz ~ 20 kHz) (DIRECT mode) Rated output: RCA Pre output (unbalanced) : 1.2 V XLR Pre output (balanced) : 2.4 V • Digital D/A output: Rated output - 2 V (at 0 dB playback) Total harmonic distortion - 0.005 % (1 kHz, at 0 dB) Dynamic range - 110 dB Digital input: Format - Digital audio interface • Phono equalizer (PHONO input - REC OUT) Input sensitivity: 2.5 mV RIAA deviation: ±1 dB (20 Hz to 20 kHz) S/N: 74 dB (A weighting, with 5 mV input) Rated output: 150 mV Distortion factor: 0.03 % (1 kHz, 3 V) n Video section • Standard video connectors Input / output level and impedance: Frequency response: • S-Video connectors Input / output level and impedance: Frequency response: • Color component video connector Input / output level and impedance Frequency response: 1 Vp-p, 75 Ω/ohms 5 Hz ~ 10 MHz - +0, -3 dB (when video convert set to "OFF") Y (brightness) signal - 1 Vp-p, 75 Ω/ohms C (color) signal - 0.286 Vp-p, 75 Ω/ohms 5 Hz ~ 10 MHz - +0, -3 dB (when video convert set to "OFF") Y (brightness) signal - 1 Vp-p, 75 Ω/ohms PB / CB signal - 0.7 Vp-p, 75 Ω/ohms PR / CR signal - 0.7 Vp-p, 75 Ω/ohms 5 Hz ~ 100 MHz - +0, -3 dB (when video convert set to "OFF") n Tuner section Receiving Range: Usable Sensitivity: 50 dB Quieting Sensitivity: S/N (IHF-A): Total harmonic Distortion (at 1 kHz): [FM] (note: µV at 75 Ω/ohms, 0 dBf = 1 x 10-15 W) 87.5 MHz ~ 107.9 MHz 1.0 µV (11.2 dBf) MONO 1.6 µV (15.3 dBf) STEREO 23 µV (38.5 dBf) MONO 77 dB STEREO 72 dB MONO 0.2 % STEREO 0.3 % [AM] 520 kHz ~ 1710 kHz 19 µV n HD Radio section Receiving Range: Usable Sensitivity: 50 dB Quieting Sensitivity: S/N (IHF-A Total harmonic Distortion (at 1 kHz): [FM] (note: µV at 75 Ω/ohms, 0 dBf = 1 x 10-15 W) 87.5 MHz ~ 107.9 MHz 1.0 µV (11.2 dBf) MONO 1.6 µV (15.3 dBf) STEREO 23 µV (38.5 dBf) MONO 77 dB STEREO 72 dB HD 85 dB MONO 0.2 % STEREO 0.3 % [AM] 530 kHz ~ 1710 kHz 20 µV 85 dB HD 0.01 % 0.01 % n Wireless LAN Network type (wireless LAN standards) : Conforming to IEEE 802.11b Conforming to IEEE 802.11g (Conforming to Wi-Fi®)z Transfer rate: DS-SS: 11 / 5.5 / 2 / 1 Mbps (Automatic switching) OFDM: 54 / 48 / 36 / 24 / 18 / 12 / 9 / 6 Mbps (Automatic switching) Security: SSID (Network name) WEP key (network key) (64/128 bits) WPA-PSK (TKIP/AES) WPA2-PSK (TKIP/AES) Used frequency range: 2,412 MHz ~ 2,472 MHz No. of channels: Conforming to IEEE 802.11b : 11ch (DS-SS) (Of which 1 channel used) Conforming to IEEE 802.11g : 11ch (OFDM) (Of which 1 channel used) n General Power supply: Power consumption: Maximum external dimensions: Weight: AC 120 V, 60 Hz 2 A 0.3 W (Standby) 434 (W) x 214 (H) x 488 (D) mm (17-3/32" x 8-27/64" x 19-7/32") 27 kg (Approx 59 lbs 8 oz) n Main remote control unit (RC-1067) Batteries: LR6/AA Type (two batteries) Maximum external dimensions: 63 (W) x 238 (H) x 31 (D) mm Weight: 190 g (Approx 6.7 oz) (including batteries) n Sub remote control unit (RC-1070) Batteries: R03/AAA Type (two batteries) Maximum external dimensions: 49 (W) x 220 (H) x 24.5 (D) mm Weight: 114 g (Approx 4 oz) (including batteries) z: Wi-Fi® conformity indicates tested and proven interoperability by the "Wi-Fi Alliance", a group certifying interoperability among wireless LAN devices. b For purposes of improvement, specifications and design are subject to change without notice. 108
![](/manual_guide/products/denon-avpa1hdci-owners-manual-english-9f90e0c/111.png)