Denon AVP-A1HDCI Owners Manual - English - Page 59

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting Specifications j Audio Delay Compensate for mismatched timing between video and audio. s Brightness Adjust picture brightness. Delay audio. This sets the delay time for audio signals. [Variable range] 0 ~ +12 Information [Variable range] 0 ms ~ 200 ms Operating from the main unit or the main remote control unit b The GUI menu is not displayed when carrying out this setting. q Press the AUDIO DELAY button on the main unit or A. DL button on the main remote control unit. w Use the o p button to set. d Chroma Level Adjust picture chroma level (saturation). [Variable range] -6 ~ 0 ~ +6 f Hue Adjust color hue. • This cannot be adjusted when playing in the EXT. IN (when in analog mode), DIRECT or STEREO mode (with "Crossover Frequency" set to "FIXED-THX-", "Front" set to "Large", "Tone Defeat" to "ON" and "Room EQ" to "OFF"). • The adjustment range is 0 to 100 ms when the Auto Lipsync Correction function is activated. [Variable range] -6 ~ 0 ~ +6 g DNR Reduces the overall level of noise on the picture. Picture Adjust Adjust the picture quality. F Menu tree F Parameter Picture Adjust a Contrast s Brightness d Chroma Level f Hue g DNR h Enhancer j Sharpness [Selectable items] OFF Low Middle High h Enhancer Emphasize picture contours. [Variable range] 0 ~ +12 j Sharpness Adjust color definition. [Variable range] -6 ~ 0 ~ +6 Status Shows information about current settings. F Menu tree F Information Status a MAIN ZONE s ZONE2/3/4 a MAIN ZONE Shows information about settings for MAIN ZONE. The items displayed differ according to the input source. [Items to be checked] Select Source Name Surround Mode Input Mode Room EQ Dynamic EQ Video Select i/p Scaler Source Level Rec Select Night Mode RESTORER etc. s ZONE2/3/4 Shows information about settings for multi-zone. [Items to be checked] Power Select Source Volume Level a Contrast Adjust picture contrast. [Variable range] -6 ~ 0 ~ +6 • When the input signal is 1080p the "Picture Adjust" setting will be ineffective. • Adjusting the "Contrast", "Brightness", "Chroma Level" and "Hue" settings does not affect the HDMI input signal. • "Hue" can be adjusted for composite video and S-Video signals. • The adjustment values are stored for the individual input sources. • "DNR", "Enhancer", and "Sharpness" are each effective with HDMI output. However, they are ineffective with 480i/576i output. 56