Denon AVP-A1HDCI Owners Manual - English - Page 26
Connecting the Power Cord, Once Connections are Completed
UPC - 883795000802
View all Denon AVP-A1HDCI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting Specifications External Controller Connecting the Power Cord Wait until all connections have been completed before connecting the power cord. RS-232C connector Power cord (included) To household power outlet (AC 120 V, 60 Hz) This connector is used for an external controller. b If you use an external controller to operate the unit via the RS-232C terminal, you must confirm the following beforehand. q Turn on the AVP-A1HDCI's power. w Turn off the AVP-A1HDCI's power from the external controller. e AVP-A1HDCI enters the standby status. • When using in combination with an RF Remote Controller (RC-7000CI, sold separately) and RF Remote Receiver (RC-7001RCI, sold separately) two-way communication with an RF Remote Controller is possible. The AVP-A1HDCI's status information as well as iPod and Internet audio music files can be browsed watching the RF Remote Controller's display. For details, refer to the operating instructions of the respective devices. • When used in combination with an RF Remote Controller and RF Remote Receiver, make the settings at GUI menu "Manual Setup" - "Option Setup" - "2Way Remote" - "Used" (vpage 42). • When using the 2-way remote control unit, connect to the Port 1 RS-232C connector. • If GUI menu "Manual Setup" - "Option Setup" - "2Way Remote"is set to "Used", you cannot use port 1 of the RS-232C connector for the external controller. Connection to the AC outlets • These outlets supply power to external audio devices. • The power supplied from this outlets turns on and off together with the set's power switch. • Audio equipment with a total power consumption of 120 W (1 A) can be connected. NOTE • Insert the AC plugs securely. Incomplete connections could cause noise. • Only use the AC outlets to plug in audio devices. Do not use them as power supplies for hairdryers or anything other than audio equipment. In addition, do not connect audio devices such as high electricity consumption power amplifiers (e.g. POA-A1HDCI). Once Connections are Completed Trigger output jacks The power of an external device equipped with a trigger input jack can be turned on and off in association with operations on the AVP-A1HDCI. For details, see GUI menu "Manual Setup" - "Option Setup" - "Trigger Out 1", "Trigger Out 2", "Trigger Out 3" or "Trigger Out 4" (vpage 42). • Output level: 250 mA/12 V Check the trigger input conditions of the connected device. Turning the Power On (vpage 58) 23