Denon AVP-A1HDCI Owners Manual - English - Page 65

Basic Operation, Checking the XM Signal Strength and, Radio ID, Accessing XM Radio Channels Directly

Page 65 highlights

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting Specifications Basic Operation 1 Either turn or press [SAT TU] (AMP mode) to select "XM". : "Source Select" (vpage 45) Checking the XM Signal Strength and Radio ID 1 Either turn or press [SAT TU] (AMP mode) to select "XM". 2 To operate using the main remote control unit, set the remote control unit to the TUNER ( ) mode. (vpage 77 "Remote Control Unit Operations") 3 Use [d f] to select the channel. When the channel is tuned in, the name of the song and artist are displayed. • The channel switches continuously when [d f] is pressed and held. • XM Radio channels can be preset using the same procedure as for FM/AM stations (vpage 59, 60 "Presetting Radio Stations (Preset Memory)" and "Listening to Preset Stations"). • The artist name, song title, category and reception level can be checked by pressing . • The time for which the GUI menus are displayed can be set at GUI menu "Manual Setup" - "Option Setup" - "GUI" - "Tuner" (vpage 42). 2 Press until "SIGNAL" appears on the display. The display will switch as shown below, depending on the reception conditions. Display GOOD MARGINAL WEAK NO GUI Status Signal strength is good Signal strength is marginal Signal strength is weak No signal 3 Adjust the position of the antenna until "SIGNAL: GOOD" is shown on the display. 4 Press until the channel (example: "XM001") is displayed. 5 Press [d f] and select channel 0 (XM000). The radio ID is shown on the display. Searching Categories 1 Press o p. Channel category 2 Use o p to select the category, then use ui to select the desired channel. Accessing XM Radio Channels Directly 1 Press [SEARCH]. 2 Press [NUMBER] then input the channel. Example: Accessing channel "XM123": [1] → [2] → [3] b If no button is pressed within several seconds, the channel automatically switches to the one whose number has been input. 3 Press ENTER to set that channel. Reception switches to the selected channel. Radio ID The strength of both the XM satellite and terrestrial signals can be checked at GUI menu "Source Select" - "XM" - "Antenna Aiming" (vpage 49). • "LOADING" is displayed while channels or data are being received. • "XM - - -" is displayed if the selected channel cannot be used. 62

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128

¶²
Getting Started
Connections
Setup
Remote Control
Multi-Zone
Information
Troubleshooting
Specifications
1
Either turn
<SOURCE SELECT>
or press
[SAT TU]
(AMP mode) to select “XM”.
:
”Source Select”
(
v
page 45)
2
To operate using the main remote control unit, set the
remote control unit to the TUNER (
) mode.
(
v
page 77 “Remote Control Unit Operations”)
3
Use
[
d
f
]
to select the channel.
When the channel is tuned in, the name of the song and artist
are displayed.
• The channel switches continuously when
[
d
f
]
is pressed and held.
• XM Radio channels can be preset using the same procedure as for
FM/AM stations (
v
page 59, 60 “Presetting Radio Stations (Preset
Memory)” and “Listening to Preset Stations”).
• The artist name, song title, category and reception level can be
checked by pressing
<STATUS>
.
• The time for which the GUI menus are displayed can be set at
GUI menu “Manual Setup” – “Option Setup” – “GUI” – “Tuner”
(
v
page 42).
Basic Operation
Checking the XM Signal Strength and
Radio ID
1
Either turn
<SOURCE SELECT>
or press
[SAT TU]
(AMP mode) to select “XM”.
2
Press
<STATUS>
until “SIGNAL” appears on the
display.
The display will switch as shown below, depending on the
reception conditions.
Display
GUI
Status
GOOD
Signal strength is good
MARGINAL
Signal strength is marginal
WEAK
Signal strength is weak
NO
No signal
3
Adjust the position of the antenna until “SIGNAL:
GOOD” is shown on the display.
4
Press
<STATUS>
until
the
channel
(example:
“XM001”) is displayed.
5
Press
[
d
f
]
and select channel 0 (XM000).
The radio ID is shown on the display.
The strength of both the XM satellite and terrestrial signals can be
checked at GUI menu “Source Select” – “XM” – “Antenna Aiming”
(
v
page 49).
Radio ID
Accessing XM Radio Channels Directly
1
Press
[SEARCH]
.
2
Press
[NUMBER]
then input the channel.
Example:
Accessing channel “XM123”:
[1]
[2]
[3]
b
If no button is pressed within several seconds, the channel
automatically switches to the one whose number has been input.
3
Press
ENTER
to set that channel.
Reception switches to the selected channel.
• “LOADING” is displayed while channels or data are being received.
• “XM - - -” is displayed if the selected channel cannot be used.
Searching Categories
1
Press
o
p
.
2
Use
o
p
to select the category, then use
ui
to select
the desired channel.
Channel category
Playback