Denon AVP-A1HDCI Owners Manual - English - Page 38
Network Setup
UPC - 883795000802
View all Denon AVP-A1HDCI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting Specifications Network Setup Make network settings. a Network Setup Make settings for wired or wireless LAN. F Menu tree F Manual Setup Network Setup a Network Setup s Other d Network Information • If you are using a broadband router (DHCP function), there is no need to make the settings at "Setting the IP Address" and "Setting the Proxy", since the DHCP function is set to "ON" in the AVP-A1HDCI's default settings. • If the AVP-A1HDCI is being used connected to a network without the DHCP function, the network settings must be made. In this case, some knowledge of networks is required. For details, consult a network administrator. • If you cannot connect to the Internet, recheck the connections and settings (vpage 21). • If you do not understand about Internet connection, contact your ISP (Internet Service Provider) or the store from which you purchased your computer. Wired LAN settings Use this procedure to configure the Wired LAN settings. 1 Connect the LAN cable (vpage 21). 2 Turn on the AVP-A1HDCI (vpage 58). AVP-A1HDCI performs automatic network setup due to the DHCP function. When connecting to a network that has no DHCP function, perform the setting in step 3. 3 Set the IP address at the GUI menu "Manual Setup" "Network Setup" - "Network Setup". q Select "Detail". e Input the address. • DHCP (Dynamic Host Configuration Protocol) : These are systems by which the IP address and other network settings are automatically set for the AVP-A1HDCI, computer, broadband router and network devices. • DNS (Domain Name System) : This is a system for converting the domain names used when browsing Internet sites (for example, "www.denon.jp") into the IP addresses actually used for communications (for example, "202.221.192.106"). w Set "OFF". r Select "Exit". q Select "Detail" and press the ENTER button. w Use the o p button to set "DHCP" to "OFF", then press the i button. The DHCP function is disabled. e Use the ui p button to input the address and press the ENTER button. IP Address : Set the IP address within the ranges shown below. The Network Audio function cannot be used if other IP addresses are set. CLASS A: 10.0.0.0 ~ 10.255.255.255 CLASS B: 172.16.0.0 ~ 172.31.255.255 CLASS C: 192.168.0.0 ~ 192.168.255.255 Subnet Mask : When connecting an xDSL modem or terminal adapter directly to the AVP-A1HDCI, input the subnet mask indicated in the documentation supplied by your provider. Normally input 255.255.255.0. Default Gateway : When connected to a gateway (router), input its IP address. Primary DNS Secondary DNS : If there is only one DNS address indicated in the documentation supplied by your provider, input it at "Primary DNS". If there are two or more DNS addresses, input the first one at "Secondary DNS". r Use the i button to select "Exit" and press the ENTER button. Setup is complete. b When connecting to the network via a Proxy server, select "Proxy" and press the ENTER button (vpage 38 "Proxy settings"). 35