Denon AVP-A1HDCI Owners Manual - English - Page 76
Recording on an External Device, REC OUT mode
UPC - 883795000802
View all Denon AVP-A1HDCI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting Specifications About the button names in these explanations < > : Buttons on the main unit [ ] : Buttons on the remote control unit Button name only: Buttons on the main unit and remote control unit 73 Recording on an External Device (REC OUT mode) You can listen to one program source while recording a different program source. 1 Press . "ZONE3 SOURCE" is shown on the display. 2 Turn until "RECOUT SOURCE" is displayed. The " " indicator lights. ZONE3 SOURCE ZONE3 TUNER ···· ZONE3 HD Radio RECOUT HD Radio RECOUT XM ···· RECOUT SOURCE 3 Turn to choose the input source to be recorded. 4 Play the program source. For operating instructions, refer to the respective equipment's operating instructions. To record FM or AM broadcasts, select the broadcast (vpage 59). 5 Start recording. For operating instructions, refer to the respective equipment's operating instructions. NOTE • Recordings you make are for your personal enjoyment and should not be used for other purposes without permission of the copyright holder. • When "DENON LINK" is assigned at the GUI menu "Assign" setting, the PCM signals, network audio signals (Internet radio, media server, USB and Rhapsody), XM signals and HD Radio signals input from the digital input connectors cannot be output from the analog REC OUT connectors. • Input sources for which "Delete" is selected at "Source Delete" cannot be selected. Dolby Headphone recording When REC OUT mode is set to "SOURCE", with the AVP-A1HDCI it is possible to output signals encoded in the Dolby Headphone mode from the recording output terminal and record them on a separate recorder. 1 The Dolby Headphone play mode is set when headphones are connected to during playback in the STANDARD (DOLBY/DTS Surround) mode. When this is done, signals encoded in the Dolby Headphone mode are automatically output from the recording output terminals (analog and digital) and can be recorded. 2 Select the parameters and set the desired mode. Start recording. Refer to the "Dolby Headphone" (vpage 51). • To cancel, press , then turn until "ZONE3 SOURCE" is displayed. • Make a test recording before starting the actual recording. • Signals are only output to the analog REC OUT connectors when the digital signals input to the digital input connectors (OPTICAL/ COAXIAL) are PCM (2-channel) signals. • Digital audio signals input to the DENON LINK or HDMI connectors are not output to the REC OUT connectors, so connect using the OPTICAL or COAXIAL connectors. • Sources selected with the REC OUT mode are output from ZONE3 as well. • In the REC OUT mode, the remote control unit's ZONE3 mode buttons cannot be operated. • When the "Digital Out" setting is set to "ZONE4 Select", the OPTICAL4 output connector becomes the ZONE4 output. When using for recording, set to "Rec Select". • Copyright protected network audio (Internet radio, media server, USB and Rhapsody) signals cannot be output from the digital output connectors (OPTICAL). NOTE Do not disconnect the headphones during recording.