Denon AVP-A1HDCI Owners Manual - English - Page 50

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting Specifications Resolution Set resolution for video signal output to HDMI. [Selectable items] Auto 480p/576p 1080i 720p 1080p 1080p:24 Hz Operating from the main unit Press the SCALE button. Auto 480p / 576p 1080p:24 Hz 1080p 1080i 720p Aspect This sets the aspect ratio when outputting 480i/576i or 480p/576p input signals from the HDMI output connector. [Input source] DVD HDP TV/CBL SAT VCR DVR-1 DVR-2 V.AUX NET/USB [Selectable items] Full Normal This can be set when "i/p Scaler" is set to anything other than "OFF". Operating from the main unit or main remote control unit Press the INPUT MODE button on the main unit or the INPUT button on the main remote control unit. Auto HDMI z1 Digital z2 EXT. IN Analog z1: This can be selected for input sources for which the GUI menu "Assign" setting is set to "HDMI" (vpage 48). Excluding CD and TUNER. z2: This can be selected for input sources for which the GUI menu "Assign" setting is set to "Digital" (vpage 48). • This can be set when "i/p Scaler" is set to anything other than "OFF". • When the "i/p Scaler" is set to "A to H & H to H", the resolutions can be setup to the analog video input signal and HDMI input signal. • To enjoy 1080p/24 Hz video images, use a monitor which supports 1080p/24 Hz video signals. • With film source (24 Hz), you can enjoy a film-like image. It is recommended that you use 1080p/60 Hz for video source and mixed source. • It is not possible to convert a 50 Hz signal to 1080p/24 Hz. It is output at a resolution of 1080p/50 Hz. • It is not possible to convert a 1080p/60 Hz signal to 1080p/24 Hz. Progressive Mode Select optimum progressive mode for video material. [Input source] DVD HDP TV/CBL SAT VCR DVR-1 DVR-2 V.AUX [Selectable items] Auto Video1 Video2 This can be set when "i/p Scaler" is set to anything other than "OFF". h Input Mode Make input mode and decode mode settings for this source. The selectable input modes depend on the input source and "Assign" setting (vpage 48, 49). Input Mode Set the input mode for this source. [Input source] ( ) TUNER PHONO iPod [Selectable items] Analog EXT. IN [Input source] NET/USB XM HD Radio [Selectable items] Auto EXT. IN [Input source] CD DVD HDP TV/CBL SAT VCR DVR-1 DVR-2 V.AUX [Selectable items] Auto HDMI Digital Analog EXT. IN When a digital signal is properly input, the " " indicator lights on the display. If the " " indicator does not light, check the digital input connector assignment and the connections. Decode Mode Set the decode mode for this source. [Input source] CD DVD HDP TV/CBL SAT VCR DVR-1 DVR-2 V.AUX [Selectable items] Auto PCM DTS • This can be selected for input sources for which the GUI menu "Assign" setting is set to "HDMI" or "Digital". • Only set "PCM" and "DTS" when playing the respective signals. j Rename Change the display name for this source. Names containing up to 8 characters can be input. [Characters that can be input] A ~ Z a ~ z 0 ~ 9 space) k Source Level Corrects the playback level of the selected input source's audio input. [Variable range] -12dB ~ 0dB ~ +12dB For input sources for which "HDMI" or "Digital" are set at the GUI menu "Assign" setting, the analog input level and digital input level can be set separately. 47