Denon AVP-A1HDCI Owners Manual - English - Page 45

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting Specifications Operating from the main unit b The GUI menu is not displayed when performing this setting. q Press and hold the AUDIO DELAY and RETURN buttons for at least 3 seconds. "Video Format" appears on the display. w Use the o p button to make the setting. e Press the ENTER, MENU or RETURN button to complete the setting. Text Text information display. [Selectable items] ON OFF Master Volume Master volume display during adjustment. [Selectable items] ON OFF NET/USB / iPod / Tuner This sets the time the on-screen display is displayed when an operation is performed. [Selectable items] Always 30s 10s OFF k Trigger Out 1 Select the conditions to turn on the trigger out 1 with respect to the zone, input source, surround mode, HDMI monitor, etc. For details about the trigger out function, see page 23. l Trigger Out 2 This sets the conditions to turn on the trigger out 2, in the same way as "Trigger Out 1" above. A0 Trigger Out 3 This sets the conditions to turn on the trigger out 3, in the same way as "Trigger Out 1" above. A1 Trigger Out 4 This sets the conditions to turn on the trigger out 4, in the same way as "Trigger Out 1" above. [Selectable items] ON - - - Setting with Respect to the Zone When the power of the zone turned on/off, the trigger out turns on. Setting with Respect to the Input Source When the input source set to on is selected, the trigger out turns on. Associated with respect to the input source for zones set to "ON" at "Setting with Respect to the Zone". Setting with Respect to the Monitor When the HDMI monitor set to on is selected, the trigger out turns on. This is effective when the "MAIN ZONE" has been set to "ON" for the "Setting with Respect to the Zone" and the input source which is set to "ON" has been selected for the "Setting with Respect to the Input Source". A2 Transducer Setup Set when using transducer. The Transducer Setup can be accessed through GUI menu "Speaker Setup" - "Subwoofer Setup" is "1SP", "2SP L/R" or "2SP MIX". The transducer signal is outputted from "SW3". Level [Variable range] -12dB ~ 0dB ~ +12dB : Set the transducer level. OFF : Turn the transducer output off. j Quick Select Name Change "Quick Select" display name. Up to 16 characters can be input. [Input characters] A ~ Z a ~ z 0 ~ 9 space) Setting with Respect to the Surround Mode When the surround mode set to on is selected, the trigger out turns on. This is effective when the "MAIN ZONE" has been set to "ON" for the "Setting with Respect to the Zone" and the input source which is set to "ON" has been selected for the "Setting with Respect to the Input Source". When you adjust "Level", the adjusted value is set for all surround modes. To adjust the level for individual surround modes, use "Channel Level" (vpage 75). LPF Set the upper limit of the low frequency output to the transducer. [Selectable items] 40Hz 60Hz 80Hz 90Hz 100Hz 110Hz 120Hz 150Hz 200Hz 250Hz 42