Dynex DX-26LD150A11 User Manual (English) - Page 10

6 DX-26LD150A11/DX-32LD150A11 TV/DVD combo components 3 Remove the eight screws and washers securing the stand column to the TV/DVD combo, then remove the stand and stand column. Stand screws (M4*10) with washers. Note: These screws can also be used to secure the wall-mount bracket to the TV/DVD combo. 2 Secure the wall-mount bracket to the back of your TV/DVD combo using the four M4*10 screws with washers provided with the bracket. 7.87" 200mm 7.87" 200mm Installing a wall-mount bracket (DX-26LD150A11) If you want to attach the TV/DVD combo to a wall-mount bracket (not provided), you should first remove the stand and stand column. See "Removing the stand and stand column" above. To attach your TV/DVD combo to a wall-mount bracket (DX-26LD150A11): 1 Remove the five screws holding the TV/DVD combo to its stand, as described above. 2 Secure the wall-mount bracket to the back of your TV/DVD combo using the four M4*10 screws and washers provided with the bracket. 3.94" 100mm TV/DVD combo components Accessories • TV/DVD combo • Power cord • Pedestal stand • Stand cover (DX-32LD150A11 only) • Remote control with batteries (2 AAA) • Screws for attaching the stand • Component video cable • Analog audio cable • Quick Setup Guide 3.94" 100mm Installing a wall-mount bracket (DX-32LD150A11) If you want to attach the TV/DVD combo to a wall-mount bracket (not provided), you should first remove the stand and stand column. See "Removing the stand and stand column" above. To attach your TV/DVD combo to a wall-mount bracket (DX-32LD150A11): 1 Remove the eight screws holding the TV/DVD combo to its stand, as described above.