Dynex DX-26LD150A11 User Manual (English) - Page 16
Connecting an S-Video device good, connection, Connecting a VCR - power cord
UPC - 600603127205
View all Dynex DX-26LD150A11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
12 DX-26LD150A11/DX-32LD150A11 Making connections 2 Connect one end of a 75-ohm, coaxial cable to the ANT/CABLE IN jack on the back of the TV/DVD combo, then connect the other end of the cable to the antenna, cable TV or satellite TV box jack. Back of TV/DVD combo ANT/CABLE IN jack Antenna, cable TV, or satellite TV box jack RF coaxial cable (75 ohm) Notes: • We recommend using a 75-Ohm, coaxial cable to reduce interference and noise that may be caused by radio wave transmissions. • Do not bundle the coaxial cable with the power cord or any other cables. • If you are using an antenna and reception is not good, contact a service technician to adjust the antenna. Connecting an S-Video device (good connection) To connect an S-Video device: 1 Make sure that your TV/DVD combo's power cord is unplugged and the S-Video device is turned off. 2 Connect an S-Video cable to the S-VIDEO OUT jack on the S-Video device. Back of TV/DVD combo S-Video cable Audio cable 3 Turn on the S-Video device, and set it to the correct output mode. See the S-Video device's user guide for more information. Connecting a VCR Note: If the VCR has an HDMI jack (best), component jacks (better), or an S-Video jack (good), connect the VCR using the best available connection. To connect a VCR: 1 Make sure that your TV/DVD combo's power cord is unplugged and the VCR is turned off. 2 Connect one end of a standard AV cable (not included) into the AV INPUT VIDEO jack on the back of the TV/DVD combo, then connect the other end of the cable to the AV OUT VIDEO jack on the VCR. -ORFor a better picture, you can connect an S-Video cable to the S-VIDEO OUT jack on the VCR and the S-VIDEO jack on your TV/DVD combo. See "Connecting an S-Video device (good connection) on page 12. Back of TV/DVD combo Note: Cables are often color-coded to connectors. Connect yellow to yellow, red to red, and white to white. AV cable Back of VCR 3 Connect the audio connectors of the AV cable (the red and white connectors) to the AV OUT AUDIO jacks of the VCR, then connect them to the AV INPUT (L/R AUDIO) jacks on the back of your TV/DVD combo. To play from the VCR: 1 Turn on your TV/DVD combo, then press INPUT. The Input Source menu opens. 2 Press INPUT repeatedly or press or to select S-Video or AV, then press OK/ENTER. 3 Turn on the VCR, insert a videotape, then press PLAY on the VCR. S-Video device 3 Connect the other end of the cable to the AV INPUT S-VIDEO jack on the back of your TV/DVD combo. 4 Connect an audio cable to the AV AUDIO OUT jacks on the S-Video device. 5 Connect the other end of the audio cable to the AV INPUT (L/R AUDIO) jacks on the back of your TV/DVD combo. To play from the device: 1 Turn on your TV/DVD combo, then press INPUT. The Input Source menu opens. 2 Press INPUT repeatedly or press or to select S-Video, then press OK/ENTER.