Dynex DX-26LD150A11 User Manual (English) - Page 9
Removing the stand and stand column, DX-26LD150A11, DX-32LD150A11 - wall mount
UPC - 600603127205
View all Dynex DX-26LD150A11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Installing and removing the stand DX-26LD150A11/DX-32LD150A11 5 4 Slide the stand column into the slot in the bottom of the TV/DVD combo. Slot TV Stand 5 Secure the stand column to the TV/DVD combo with the eight screws and washers provided. Stand screws (M4*10) with washers Removing the stand and stand column (DX-26LD150A11) If you want to wall-mount the TV/DVD combo, you will need to remove the stand as well as the stand column. To remove the stand and stand column (DX-26LD150A11): 1 Lay your TV/DVD combo face down on a soft, dry, and lint free surface. 2 Remove the five screws securing the stand column to the TV/DVD combo, then remove the stand and stand column. Stand screws (M4*10) and washers Note: These screws can also be used to secure the wall-mount bracket to the TV/DVD combo. 6 Secure the stand cover (included) to the TV/DVD combo with the two screws provided. Screws (M3*8) Stand cover Stand screw holes (bottom view of stand) Removing the stand and stand column (DX-32LD150A11) If you want to wall-mount the TV/DVD combo, you will need to remove the stand as well as the stand column. To remove the stand and stand column (DX-32LD150A11): 1 Lay your TV/DVD combo face down on a soft, dry, and lint free surface. 2 Remove the two screws securing the stand cover to the TV/DVD combo, then remove the stand cover. Screws (M3*8) Stand cover 7 Place your TV/DVD combo in an upright position on a flat surface.