Dynex DX-26LD150A11 User Manual (English) - Page 18

14 DX-26LD150A11/DX-32LD150A11 Turning on your TV for the first time Connecting a home theater system To connect an audio receiver or Digital sound system: 1 Make sure that your TV/DVD combo's power cord is unplugged and the audio device is turned off. 2 Connect analog audio cables to the AUDIO L/R OUTPUT jacks on the back of your TV/DVD combo, then plug the cables into the Audio In jacks of your audio receiver. -ORPlug a digital coaxial cable into the COAXIAL DIGITAL OUTPUT jack on the back of your TV/DVD combo, then plug it into the digital coaxial input jack on your Digital sound system or home theater system. Back of TV/DVD BacckomofbToV/DVD combo Turning on your TV for the first time The first time you turn on your TV, the Setup Wizard opens. The Setup Wizard guides you through setting up basic settings including the menu language, time mode, picture mode, and TV signal source. To configure your TV: 1 Make sure that you have inserted the batteries in the remote control, connected your devices to the TV, and connected the AC power. 2 Press (Power), then wait several seconds. The initial Setup Wizard opens (only the first time you turn on your TV) to the Choose your menu language screen. Setup Wizard Choose your menu language English Français Español Next Audio receiver Digital sound system Audio cable Digital coaxial audio cable Note: The DIGITAL OUTPUT jack only works with digital sources. Connecting headphones To connect headphones: • Connect the headphones to the headphone jack on the side of your TV/DVD combo. Side of TV/DVD combo Note: Loud noise can damage your hearing. When using headphones, use the lowest volume setting that still lets you hear the sound. Move Select ENTER Next MENU Previous 3 Press or to select English, Français, or Español, then press OK/ENTER to confirm. The Time screen opens with Mode highlighted. Mode DST Time Zone Year Month Day Time Setup Wizard Time Auto Off Pacific 1980 1 6 12 : 0 AM Move Select ENTER Next MENU Previous 4 Press or to highlight an option, then press or to adjust the option. You can select: • Mode-You can select Auto or Custom time mode. If you select Auto, the date and time are set based on a time signal received from a DTV channel. If you select Custom, you can adjust the date and time. • DST (Daylight Saving Time)-You can select On or Off. • Time Zone-You can select Pacific, Alaska, Hawaii, Atlantic, Eastern, Central, or Mountain. • Year-Press or to select the current year. • Month-Press or to select the current month. • Day-Press or to select the current day. • Time-When Time is highlighted, press or . Press or to move the cursor from field to field, then press or to change the value in the field. Press TV MENU when the time settings (hour and minute) are complete.