Epson ActionLaser 1000 User Manual - Page 159
it into the back slot., Be sure the power is turned off; then plug the power cord
View all Epson ActionLaser 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
6. Insert the interface cable(s) into the U-shaped part of one cable clip. Lift the left side of the printer up slightly. Then hook the short lip of the clip into the forward slot and push the bottom of the clip under the printer until it clicks in place. Repeat this procedure with the second clip and insert it into the back slot. 7. Be sure the power is turned off; then plug the power cord into an electrical outlet. Options 5-45
6.
Insert the interface cable(s) into the U-shaped part of one
cable clip. Lift the left side of the printer up slightly. Then
hook the short lip of the clip into the forward slot and push
the bottom of the clip under the printer until it clicks in
place. Repeat this procedure with the second clip and insert
it into the back slot.
7.
Be sure the power is turned off; then plug the power cord
into an electrical outlet.
Options 5-45