Epson ActionLaser 1000 User Manual - Page 59

If you are using a serial interface, make sure that you set an 8-bit data word and not a 7-bit word in your interface settings in SelecType. Graphics require large amounts of memory; see "Memory Problems," in this chapter for more help. SelecType does not function as expected Application software programs override SelecType settings. Therefore, use software settings instead of SelecType settings whenever possible. Your setting may have been changed by your software program. Perform a factory reset by pressing the RESET button while you turn on your printer. Then try printing using the section "Testing the computer-to-printer connection" in your Setup and Maintenance guide. You may have entered the wrong SelecType level. See the Quick Reference card whenever you use SelecType. You may be trying to select a setting that is not available in the currently selected printer emulation. To check the available options, see Appendixes B and C. You may be trying to set up different SelecType configurations for different printer emulations. See Appendixes B and C for more information. Never save settings to the same macro number in different interface channels. Troubleshooting 3-7