Epson ActionLaser 1000 User Manual - Page 170
QA-10 Technical Specifications, Signal, Return, Direction, Description
View all Epson ActionLaser 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
Signal Pin 10 11 12 13 14 15 16 17 18 19-30 Return Pin 28 29 30 - - Signal Direction ACKNLG OUT BUSY OUT PE OUT SLCT OUT AUTOFEED IN NC - GND - CHASSIS - GND NC - GND - Description About a 10-microsecond pulse. LOW indicates data has been received and that the printer is ready to accept more data. A HIGH signal indicates that the printer cannot receive data. The signal goes HIGH in the following cases: 0 During data entry (for each character) 0 During printing 0 During off-line state Q During printer-error state A HIGH signal indicates that the printer is out of paper. Pulled up to +5V through 3.3 K ohm resistance. During the LOW state, the paper is automatically fed one line after printing. (The signal level can be fixed using SelecType.) Not used. Logic ground level. Printer's chassis ground, which is isolated from the logic ground. Not used. Twisted-pair return signal ground level. A-10 Technical Specifications