Epson ActionLaser 1000 User Manual - Page 207
Default Settings
View all Epson ActionLaser 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 207 highlights
Default Settings When the printer is initialized, the settings for the HP emulation are reset to the values shown in the table below. Item Paper input Paper size Orientation Copy count Page length VMI HMI Top margin Text lines Text length portrait Left margin Right margin Line termination Portrait SelecType setting SelecType setting 66 (US) or 70 (other) lines Depends on paper size and orientation settings. 8/48 inch (6 lines per inch) Page length minus 1 divided by text length values are fixed and depend on the SelecType paper size setting. The page length and text length are measured in inches. 12/120 inch (10cpi) Default HMI of the selected font 1/2 inch (150 dots) 1/2 inch (150 dots) when SelecType OFFSET is 0. 60 (US) or 64 (other) lines I SelecType setting 60 (US) or 64 (other) lines SelecType setting Logical page left margin Logical page right margin CR=CR, LF=LF, FF=FF Logical page left margin Logical page right margin CR=CR, LF=LF, FF=FF B-30 HP Emulation Mode