Epson ActionLaser 1000 User Manual - Page 34
Adjusting print density, Resolution Improvement Technology, select darker print - 1500 cartridge
View all Epson ActionLaser 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
For serious print quality problems, such as black or white streaks, see the print quality section in Chapter 3, "Troubleshooting." Adjusting print density If your test prints are too light or too dark, adjust print density as follows: 1. Press the LEVEL 2 button. 2. Press V until the following appears: 0 DENSITY L""" D b 3. Press b once and then 'I to select a density setting from 1 to 5 asterisks. The more asterisks there are the darker the print. 4. Press ) to set the new density setting. 5. Press the EXIT button to exit SelecType. 6. Reprint the first page of your document to see if the density is satisfactory. If the density needs further adjustment, repeat steps 1 through 5. Note: Increasing the print density increases toner consumption. If you select darker print, you my need to replace the imaging cartridge more often. Resolution Improvement Technology If you have an ActionLaser 1500 printer, read this section on enhancing print quality. Resolution Improvement Technology (RITech) is Epson's new printer technology that produces smoother and crisper lines, text, and graphics. 1-18 Controlling Your Printer