Epson ActionLaser 1000 User Manual - Page 160
Checking the printer’s memory, ActionLaser 1000 and 1.0MB for the ActionLaser 1500. Use
View all Epson ActionLaser 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
Checking the printer's memory Complete the following steps to make sure that the memory chip sets are installed properly and are functioning correctly. 1. Turn on the printer power and watch the display for the following: 0 All the indicator lights on the control panel light briefly. 0 Themessage RAM Check appears. 2. Make sure that the amount of RAM displayed by the RAM check status message matches the new total RAM memory (including the resident memory of 0.5MB for the ActionLaser 1000 and 1.0MB for the ActionLaser 1500). Use the tables in "Selecting a memory chip set combination" described earlier in this chapter. If the correct amount of RAM does not appear, turn off the printer and remove the controller board to check that the chip set is in the correct sector and that each chip is well-seated in its socket. If the RAM check message is still incorrect, contact a qualified service person for assistance. 5-46 Options