Epson B-510DN User's Guide - Page 133
Aligning the Print Head, Using the Print Head Alignment Utility for Windows
View all Epson B-510DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
3. Press the d Down or u Up button to select MAINTENANCE, and then press the OK or r Right button. 4. Press the d Down or u Up button to select CLEANING, and then press the OK or r Right button. 5. Press the OK button to start cleaning. The P Power light begins flashing. c Caution: Never turn off the printer while the P Power light is flashing. Doing so may damage the printer. 6. When the P Power light stops flashing, the printer returns to the nozzle check menu. Press the OK button to print a nozzle check pattern to confirm that the head is clean. & See "Checking the Print Head Nozzles" on page 129. Note: ❏ If print quality has not improved after repeating this procedure, turn off the printer and wait for at least six hours. Then run the nozzle check again and repeat the head cleaning if necessary. ❏ If print quality remains a problem, contact Epson. & See "Where To Get Help" on page 164. ❏ To maintain print quality, we recommend printing a few pages on a regular basis. Aligning the Print Head If you notice a misalignment of vertical lines or horizontal banding, you may be able to solve this problem by using the Print Head Alignment utility in your printer driver or from the printer by using the buttons. Refer to the appropriate section below. Note: Do not press the + Cancel button to cancel printing while printing a test pattern with the Print Head Alignment utility. Using the Print Head Alignment Utility for Windows Follow the steps below to align the print head using the Print Head Alignment utility. 1. Make sure that no lights are indicating errors. 2. Make sure letter/A4 size plain paper is loaded in the front paper cassette. Maintaining Your Printer 133