Epson BrightLink 450Wi Quick Guide - Page 9
Connecting the Cables, Connecting the VGA Computer Cable - interactive pen
View all Epson BrightLink 450Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Connecting the Cables VGA computer cable USB cable You can connect the projector to any computer that has a standard monitor out port using the VGA computer cable that came with the projector. In addition, you must connect the USB cable before you can use the interactive pens. If the cable is not long enough to reach your computer, you may need to use a USB booster cable (not included). You can also project through the USB port (USB display) or through a network. However, the VGA monitor out port on your computer provides the best performance when used with the interactive pens. Connecting the VGA Computer Cable 1. Locate the VGA computer cable connected to the projector. 2. Connect the other end of the cable to your computer's monitor out port. Connecting the Cables 9