Epson C264011 Printer Basics - Page 40

cartridge, repeat steps 3 through 8 before, If you need to replace the other ink

Get Epson C264011 - Stylus Photo 1200 Color Inkjet Printer PDF manuals and user guides
UPC - 010343816213
View all Epson C264011 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

5. Remove the new ink cartridge from its packaging. 6. Remove only the yellow part of the tape seal on top as shown: Don't pull off the blue portion or try to remove the clear seal underneath the cartridge. Remove the yellow tape Black cartridge Color cartridge You must remove the yellow tape from the top of the cartridge or you will permanently damage it. Do not remove the clear seal from the bottom of the cartridge; ink will leak out. 7. Lower the new ink cartridge into its holder with the label facing up and toward the back of the printer. 8. Press down the ink cartridge clamp until it locks in place. 9. If you need to replace the other ink cartridge, repeat steps 3 through 8 before going on to step 10. 10. Press the E load/eject button and close the printer cover. The printer moves the print head and begins charging the ink delivery system. The P power light flashes and the printer makes various sounds. Charging takes about one minute. When it's finished, the P power light stops flashing and stays on. Never turn off the printer while the P power light is flashing, unless the printer hasn't moved or made noise for more than 5 minutes. 34

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
34
5.
Remove the new ink cartridge from
its packaging.
6.
Remove only the yellow part of the
tape seal on top as shown:
Don’t pull off the blue portion or try to
remove the clear seal underneath the
cartridge.
You must remove the yellow tape from the top of the
cartridge or you will permanently damage it. Do not remove
the clear seal from the bottom of the cartridge; ink will leak
out.
7.
Lower the new ink cartridge into its
holder with the label facing up and
toward the back of the printer.
8.
Press down the ink cartridge clamp until
it locks in place.
9.
If you need to replace the other ink
cartridge, repeat steps 3 through 8 before
going on to step 10.
10. Press the
E
load/eject button and close the printer cover.
The printer moves the print head and begins charging the ink delivery system.
The
P
power light flashes and the printer makes various sounds.
Charging takes about one minute. When it’s finished, the
P
power light stops
flashing and stays on.
Never turn off the printer while the
P
power light is flashing,
unless the printer hasn’t moved or made noise for more than
5 minutes.
Black cartridge
Color cartridge
Remove the yellow tape