Epson EPL7250 User Manual - Page 35
You will not be able to use ELP Link IV software if your system
UPC - 010343820852
View all Epson EPL7250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Note: If your system uses a serial mouse, perform steps 2 and 3 using the PC mouse serial cable instead of the PS/2 mouse or USB cable (not shown in the illustration). 4. To use the ELP Link IV software or to program new effects for the Effects buttons on the remote control, connect one end of the serial cable to the SERIAL terminal on the square end of the main cable. Connect the other end of the serial cable to the serial port on the back of your computer. Note: You will not be able to use ELP Link IV software if your system has only one serial port that is being used to support a serial mouse. 5. Tighten the screws on all connectors. Connecting to a Computer 27
Connecting to a Computer
27
Note:
If your system uses a serial mouse, perform steps 2 and 3 using
the PC mouse serial cable instead of the PS/2 mouse or USB cable (not
shown in the illustration).
4.
To use the ELP Link IV software or to program new effects for the
Effects buttons on the remote control, connect one end of the
serial cable to the
SERIAL
terminal on the square end of the main
cable.
Connect the other end of the serial cable to the serial port on the
back of your computer.
Note:
You will not be able to use ELP Link IV software if your system
has only one serial port that is being used to support a serial mouse.
5.
Tighten the screws on all connectors.