Epson EPL7250 User Manual - Page 62
with your video source., need to purchase the appropriate cable or use the cable that came
UPC - 010343820852
View all Epson EPL7250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
To connect a video source to the projector: 1. Turn off the projector and video source if they are on. 2. If your video source uses a small, round, one-prong composite (RCA) video connector, you'll need the audio/video cable that comes with the projector. If your video source uses a large, round, four-prong S-Video connector or a BNC type connector, you will need to purchase the appropriate cable or use the cable that came with your video source. 3. For composite video, connect the yellow RCA plug on one end of the audio/video cable to the projector's Video jack. Connect the other yellow RCA plug to the video-out jack of your video source. audio/video cable 54 1 • Setting Up the Projector
1
•
Setting Up the Projector
54
To connect a video source to the projector:
1.
Turn off the projector and video source if they are on.
2.
If your video source uses a small, round, one-prong composite
(RCA) video connector, you’ll need the audio/video cable that
comes with the projector. If your video source uses a large, round,
four-prong S-Video connector or a BNC type connector, you will
need to purchase the appropriate cable or use the cable that came
with your video source.
3.
For composite video, connect the yellow RCA plug on one end of
the audio/video cable to the projector’s Video jack. Connect the
other yellow RCA plug to the video-out jack of your video source.
audio/video cable