Epson ET-M2170 Users Guide - Page 119

Parent topic: Starting a Scan Changing Default Scan Job Settings You can view or change the default scan job settings your product uses when you scan to your computer. You do this using the Event Manager program. 1. Do one of the following to open Event Manager: • Windows 10: Click and select EPSON Software > Event Manager. • Windows 8.x: Navigate to the Apps screen and select Event Manager. • Windows (other versions): Click or Start > All Programs or Programs > EPSON Software > Event Manager. • Mac: Open the Applications folder, click Epson Software, and select Event Manager. 2. Open the Scanner (Windows) or Select Scanner (Mac) drop-down list and select your product, if necessary. 3. Click Make Job Settings. 4. Open the Edit Job Settings drop-down list and select the scan job settings you want to view or change. 5. Change the settings as necessary. 6. Click OK. 7. Click Close to close the Event Manager window. Parent topic: Starting a Scan Using the Product Control Panel Setting Up a WSD Port (Windows 7/Windows Vista) You can scan to a networked Windows computer using WSD (Web Services for Devices). You must first set up a WSD port on your Windows 7 or Windows Vista system (the port is set up automatically on Windows 10 and Windows 8.x). Before you set up a WSD port, make sure you installed your product software, and connected your product and computer to the same network. 1. Turn on your product. 2. Print a network status sheet so you can identify the network name and model name for your product on the network. 3. Click or Start and select Computer. 4. On the left side of the window, select Network. 119