Epson ET-M2170 Users Guide - Page 35

Selecting Wireless Network Settings from the Control Panel You can select or change wireless network settings using your product control panel. To install your product on a wireless network, follow the instructions on the Start Here sheet and install the necessary software. The installer program guides you through network setup. Note: Breakdown or repair of this product may cause loss of network data and settings. Epson is not responsible for backing up or recovering data and settings during or after the warranty period. We recommend that you make your own backup or print out your network data and settings. 1. Press the home button, if necessary. 2. Press the arrow buttons to select Wi-Fi Setup and press the OK button. You see this screen: 3. Press the arrow buttons to select Wi-Fi (Recommended) and press the OK button twice. 4. Press the arrow buttons to select Wi-Fi Setup Wizard and press the OK button twice. 5. Press the arrow buttons to select the name of your wireless network and press the OK button. If you do not see your wireless network's name, you can enter it manually. Note: To enter the wireless network name manually, select Other SSIDs and press the OK button. Enter your network name as described in the next step. 35