Epson ET-M2170 Users Guide - Page 42
Wi-Fi Protected Setup (WPS), Using WPS to Connect to a Network
View all Epson ET-M2170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Wi-Fi Protected Setup (WPS) If your network uses a WPS-enabled wireless router or access point, you can quickly connect your product to the network using Wi-Fi Protected Setup (WPS). Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access point. If there is no hardware button, there may be a virtual WPS button in the software for the device. Check your network product documentation for details. Using WPS to Connect to a Network Parent topic: Wi-Fi or Wired Networking Using WPS to Connect to a Network If you have a WPS-enabled router or access point, you can use Wi-Fi Protected Setup (WPS) to connect your product to the network. 1. On the product, press the home button, if necessary. 2. Press the arrow buttons to select Wi-Fi Setup > Wi-Fi (Recommended) and press the OK button twice. You see this screen: 3. Press the arrow buttons to select Push Button Setup (WPS) and press the OK button. 4. Follow the instructions on the LCD screen to complete WPS setup. 42