Epson L1200UNL Users Guide - Page 180
Matching the Screens Automatically, Location Setup
View all Epson L1200UNL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
Related tasks Saving a Scheduled Event Matching the Screens Automatically You can automatically correct the brightness and tint for multiple projectors based on the brightness and tint settings you selected for the master projector. Before you start, make sure of the following: • Select Multi-Projection for the Color Mode setting and adjust the Brightness, Contrast, Color Saturation, Tint, White Balance, and Advanced settings in the Image menu, as necessary, on the master projector. • You are projecting on a matte white diffusion screen that is flat and even. • The projected image is between 80 to 200 inches (203 to 508 cm) and is rectangular after tiling. • All the projectors are connected to a network and the Location Setup setting has been configured. • Nothing is blocking the built-in camera on the front of each projector. Note: Auto adjustment is not available for the following lenses: ELPLX01, ELPLR04, ELPLM11, ELPLM07, ELPLL08, ELPLL07 (Pro L1100U/L1200U/L1300U/L1405U) and ELPLR04, ELPLL08, ELPLL07 (Pro L1500U/L1505U). After auto adjustment, the movement range for lens shift is reduced. 1. Press the Menu button. 2. Select the Extended menu and press Enter. 3. Select the Multi-Projection setting and press Enter. 4. Select the Screen Matching setting and press Enter. 180