Epson L1200UNL Users Guide - Page 46
Connecting to an HDBaseT Transmitter, Audio, Computer, DVI-D, Parent topic, Related tasks, HDBaseT
View all Epson L1200UNL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
2. Connect the other end to the Audio port that corresponds to the Computer or BNC port you are using. Note: If you are projecting video through the projector's DVI-D port, connect the end of your audio cable to the Audio3 port. Parent topic: Connecting to Computer Sources Related tasks Connecting to External Speakers Connecting to an HDBaseT Transmitter To send an HDMI or RS-232C signal over a long distance, you can connect the projector to an optional HDBaseT transmitter using a 100Base-TX network cable. This is useful when you want to send a signal to or control the projector from a remote location, such as in a hall or event site, since you can use a network cable up to 328 feet (100 m) in length. To ensure proper data transmission, use a Category 5e STP cable or better. 1. Turn off the projector and HDBaseT transmitter. Note: Make sure the projector and HDBaseT transmitter are turned off when connecting or disconnecting a network cable between the two devices. 2. Connect one end of the network cable to the HDBaseT port on the transmitter. 46