Epson L1200UNL Users Guide - Page 85

1. Connect the power cord to the projector's power inlet. 2. Plug the power cord into an electrical outlet. The projector's On/Standby light turns blue. This indicates that the projector is receiving power. Note: With Direct Power On turned on, the projector turns on as soon as you plug it in. 3. Press the On button on the projector or remote control to turn on the projector. The projector beeps and the Status light flashes blue as the projector warms up. After about 30 seconds, the Status light stops flashing and turns blue. Warning: Never look into the projector lens when the laser is on. This can damage your eyes and is especially dangerous for children and pets. Caution: Make sure no objects are blocking the light from the projector lens. Objects blocking the lens for an extended time can melt and light that is reflected back into the lens can cause the projector to malfunction. Note: If the Auto Source Search setting in the Extended menu is enabled, the projector automatically detects the input signal when you turn it on. If you do not see a projected image right away, try the following: • Make sure the lens cap is off. • Turn on the connected computer or video device. • Insert a DVD or other video media and press the play button, if necessary. 85