Epson L1200UNL Users Guide - Page 218

Setting A/V Mute Settings Advanced Date & Time Lens Calibration Advanced settings Setting BNC Sync Termination Remote Control Type Beep Indicators Instant Off Inv Direction Button Description Adjusts the A/V Mute settings Fade-in: sets the number of seconds for a fade-in transition effect when displaying an image Fade-out: sets the number of seconds for a fade-out transition effect when hiding an image A/V Mute Timer: turns off the projector automatically if A/V Mute is enabled and 2 hours of inactivity has passed A/V Mute Release: select A/V Mute if you want to use only the A/V Mute button to turn off A/V mute, or select Any Button to use any button to turn it off See the next table in this topic Adjusts the projector's time and date settings Displays information about the lens currently in use Description Sets the termination for the signal from the BNC port (set to off unless you need analog termination, such as for switchers) Select Normal to use the remote control that came with the projector, or Simple to use a different Epson projector remote control and disable the remote control that came with the projector Controls the beep that sounds when you turn the projector on or off Select Off to turn off projector lights, except warning lights Select Enabled to place the projector in standby mode after turning it off, or Disabled to place the projector in standby mode approximately 75 seconds after turning it off Enable this setting if you installed the projector on a ceiling and want to invert the direction of the arrow buttons on the control panel 218