Epson LQ-1000 User Manual - Page 101
Table A-1. DIP switch panel 1, Switch, ON OFF, Function, Explanation
View all Epson LQ-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Table A-1. DIP switch panel 1 Switch No. 1-1 1-2 1-3 Function International character set selection 1-4 select large or small buffer capacity 1-5 Select Letter Quality or draft print style ON OFF Explanation See Table A-3 These three switches select the International character sets shown in Table A-3 When you receive your LQ, the switches are set for the USA character set. To see the other character sets, turn to the end of Appendix B. 7K 1K The buffer stores data from your computer. When you receive your LQ, the buffer is set for 1 kilobyte (OFF), which allows the printer to use user-deftned (downloaded) characters. If you want to free your computer while the LQ prints, change the setting to 7 kilobytes (ON). draft LQ You can select the draft mode or the Letter Quality mode to be in effect when you turn the power on. You car still select either mode using the control panel buttons. -6 Condensed characters ON OFF Condensed characters are useful when you're printing spreadsheets and other documents where you need to print as much on a page as possible. If you set this switch to ON everything you print will be in condensed mode (unless a software command overrides it). 1-7 One-inch skip-over ON OFF If your commercial software does perforation not automatically skip over the perforation between sheets of continuous-feed paper, set this switch to ON and set the top-of-page 3 lines below the perforation. The LQ then automatically leaves a top and bottom margin of ½ inch on each page, and skips over the perforations. Set this switch OFF vyhen using cut sheet feeder. 1-8 Cut sheet feeder ON OFF Set this switch to ON only when using the optional cut sheet feeder. = Factory setting When delivered A-3