Epson PowerLite 1264 User Manual - Page 36
Connecting to a Component-to-VGA Video Source, If you are using an adapter, connect these connectors
View all Epson PowerLite 1264 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
3. Connect the other end of the cable to the projector's HDMI /MHL port. Note: The projector converts the digital audio signal sent from your video source into a mono analog signal for the internal speaker. Parent topic: Connecting to Video Sources Connecting to a Component-to-VGA Video Source If your video source has component video ports, you can connect it to the projector using an optional component-to-VGA video cable. Depending on your component ports, you may need to use an adapter cable along with a component video cable. 1. Connect the component connectors to your video source's color-coded component video output ports, usually labeled Y, Pb, Pr or Y, Cb, Cr. If you are using an adapter, connect these connectors to your component video cable. 2. Connect the VGA connector to a Computer port on the projector. PowerLite 1224/1264 PowerLite 1284 3. Tighten the screws on the VGA connector. 36