Epson PowerLite 1930 Operation Guide - EasyMP Network Projection - Page 8

Installing the Software 8 For Mac OSX OS Mac OS X 10.4.x 32-bit Mac OS X 10.5.1 or later* 32-bit Mac OS X 10.6.x 32/64-bit Mac OS X 10.7.x 32/64-bit Recommended: Mac OS X 10.4.11/10.5.8/10.6.6/10.7.0 CPU PowerPC G3 900 MHz or faster Recommended: CoreDuo 1.83 GHz or faster Amount of Memory 256 MB or more Recommended: 512MB or more Hard Disk Space 20MB or more Display Resolution of no less than XGA (1024x768) and no higher than WUXGA (1920x1200). Display color of 16-bit color or greater (approx. 32000 display colors) * Operation is not guaranteed in Mac OS X 10.5.0 because the Firewall settings are not set correctly when the version is updated. Installing Make sure you check the following points before starting installation. • Close all running applications before starting installation. • When the language selected for the installation varies from that of the OS being used, the screens may not be displayed correctly. q For EMP NS Connection users The name of the software has changed. Before change: EMP NS Connection After change: EasyMP Network Projection When using the same function as EMP NS Connection on the projector, install EasyMP Network Projection after uninstalling EMP NS Connection. Depending on the model, you may not be able to connect to the projector correctly using EMP NS Connection. For Windows q You need administrator authority to install EasyMP Network Projection. A Turn on your computer. B Insert the EPSON Projector Software CD-ROM into the computer. The installer starts automatically. q If the installer does not start automatically, open the CD-ROM drive from My Computer (or Computer), and then double-click InstallNavi.exe or EMP_NSCInst.exe. C Follow the on-screen instructions to install. For Mac OS X A Turn on your computer.