Epson PowerLite 7800pNL User Manual - Page 36

Projecting the Image, Turning on the Projector

Get Epson PowerLite 7800pNL PDF manuals and user guides View all Epson PowerLite 7800pNL manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

Projecting the Image Make sure your projector and other equipment are set up as described in Chapter 1. Then follow the instructions below to start the projector and display an image. note To shut down the projector, see page 43. Shutting down the projector correctly prevents premature lamp failure and possible damage from overheating. Turning on the Projector If you turn on any connected computer or video equipment before starting the projector, this lets the projector automatically detect and display the image source. If you turn on the projector first, or have multiple pieces of connected equipment, you may have to select the image source manually (see page 30). Follow these steps to turn on the projector: 1. Remove the lens cap. 2. Plug one end of the power cable into the projector, and the other end into a grounded electrical outlet. 3. Wait until the Ppower light stops flashing and turns orange. Power light 28 Displaying and Adjusting the Image

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
28
Displaying and Adjusting the Image
Projecting the Image
Make sure your projector and other equipment are set up as described
in Chapter 1. Then follow the instructions below to start the projector
and display an image.
Turning on the Projector
If you turn on any connected computer or video equipment before
starting the projector, this lets the projector automatically detect and
display the image source. If you turn on the projector first, or have
multiple pieces of connected equipment, you may have to select the
image source manually (see page 30).
Follow these steps to turn on the projector:
1.
Remove the lens cap.
2.
Plug one end of the power cable into the projector, and the other
end into a grounded electrical outlet.
3.
Wait until the
P
power light stops flashing and turns orange.
note
To shut down the projector,
see page 43. Shutting down
the projector correctly
prevents premature lamp
failure and possible damage
from overheating.
Power light