Epson PowerLite 7800pNL User Manual - Page 44
Adjusting the Image Shape
View all Epson PowerLite 7800pNL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Adjusting the Image Shape In most cases, you can maintain a square or rectangular image by placing the projector directly in front of the center of the screen with the base of the lens level with the bottom of the screen. Even if the projector is slightly tilted (within a range of 40° up or down), the projector has an automatic keystone correction function that detects and corrects vertical keystone distortion. Keystone correction Keystone correction Quick Corner correction Projector tilted up Corrected image Projector tilted down It takes about one second after projection starts for the image to be corrected. During this time, a vertical keystone correction gauge appears on the screen. If your image is still distorted, you can correct it using either of these methods: ■ If the image has two parallel sides but is wider on one side (top, bottom, left, or right), you can correct it using the Keystone keys on the projector's control panel or the projector's Keystone menu (see "Using Keystone Correction" on page 37). ■ If the image is trapezoid-shaped (no two sides are parallel), you can adjust its shape using Quick Corner™ (see page 37). You cannot use both keystone correction and Quick Corner at the same time. 36 Displaying and Adjusting the Image