Epson PowerLite 811p User Manual - Page 70
Replacing the Lamp - bulb
View all Epson PowerLite 811p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
4. If you need to replace the filter, press the arrow tab and lift up the filter to remove it. Press the arrow tab 5. To install a new filter, first insert the tabs, then press down until it clicks in place. warning Be extremely careful when removing the lamp module. In the unlikely event that the bulb has ruptured, small glass fragments may be present and should be removed with caution. If your projector is mounted on the ceiling, you should unmount it before accessing the lamp compartment. This will make it easier for you to replace the lamp and minimize the chance of any small glass fragments dropping from the projector. Replacing the Lamp The projection lamp typically lasts for about 1500 hours of use. It is time to replace the lamp when: I The projection image gets darker or starts to deteriorate. I The lamp warning light is red or flashing red. I The message LAMP REPLACE appears on the screen when the lamp comes on (after about 1400 hours of use). To maintain projector brightness and image quality, replace the lamp as soon as possible. Contact your dealer or call EPSON at (800) 873-7766 in the United States for a replacement lamp. Request part number V13H010L15. In Canada, please call (800) 463-7766 for dealer referral 64 Maintaining and Transporting the Projector